vROK 3030

10.4” Railway Open Frame Panel Computer with Intel Atom® x6414RE Processor
  • Main Feature
  • Intel Atom® x6414RE quad-core processor, 9W
  • 10.4” TFT LCD monitor with PCAP touch (BOM optional)
  • IPS LCD with wide viewing angle and resolution 1024 x 768
  • Sunlight readable capability: 1,200nits LCD brightness
  • LCD monitor, 1 x HDMI, 1 x DP video outputs for triple displays
  • Isolated CANBus 2.0 x 1
  • CVBS input for analog camera x 4 (work with optional capture card)
  • PoE supported for IP camera x 2 (optional)
  • Open frame design for wide variety of form factors
  • EN 50155, class OT3 (-30°C~70°C) certificated for railway
Add to Inquiry
Datasheet(PDF)
LCD Panel 10.4-inch TFT LCD panel with LED backlight 1024 x 768 pixels Brightness: 1200 cd/m² (typical) Viewing angle: 170° (H)/170°(V) Contrast ratio: 900:1 (typical)
Touch Screen (BOM optional) Projected capacitive Anti-glare coating surface Transmission rate: 85 ± 3%
CPU Intel Atom® x6414RE quad-core processor, 1.5 GHz, TDP 9W
Memory 1 x 260-pin DDR4 SO-DIMM socket support 3200MHz up to 32GB. default 2666MHz, 4GB With In-Band ECC (IBECC)
Video Output 1 x HDMI 1.4b up to 3840 x 2160@30 Hz 1 x DP 1.4 up to 4096 x 2160@60 Hz
Storage 1 x M.2 2280 Key M socket (SATA 3.0 or PCle 3.0 x1) 1 x mSATA (occupied mini-PCIe slot)
Expansion 1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2) 1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0/SATA 3.0) 1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen2) for LTE/5G NR module, BOM optional 1 x Full size mini-PCIe socket (USB 2.0, USB 3.2 Gen2 (BOM optional)) for LTE module, with 1 x external micro-SIM slot, 1 x internal micro-SIM slot
GNSS and Onboard Sensor 1 x Default U-blox NEO-M9N GNSS module for GPS+QZSS /Glonass/Galileo/Beidou M8U modules with dead reckoning available 1 x 3D accelerometer and 3D gyroscope
LAN and Power over Ethernet 2-Port LAN M12 X-coded, 10/100/1000/2500 Mbps, Intel® I225-IT (optional PoE 802.3af/at, max. 30W, w/ VIOD-POE2-01)
Security TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
I/O Interface-Lateral Right Side
- 1 x System reset button
- 1 x USB 3.2 Gen2 type A connector
- 1 x Micro-SIM slot w/ cover
I/O Interface-Rear 2 x DB9 (COM1/COM2) for full RS232/RS422/RS485 (w/ isolation) 1 x Power connector, M12 A-coded 5-pin 2 x 10/100/1000/2500 Mbps LAN, M12 X-coded 8-pin 1 x M12 A-coded 8-pin for 2 x USB 2.0 1 x Line-in (stereo), 2 x Line-out (setreo) (AUDIO, DB9, female) 1 x HDMI output 1 x DP output 1 x M12 (MULTI PORT1, A-coded 17-pin)
- 4 x DI (w/ isolation)
- 2 x DO (w/ isolation)
- Power in for DIO isolation, 14~48VDC
- 1 x Isolated CANBus 2.0B
- 1 x Power button
- 4 x Composite video input
1 x RP-SMA connector hole for Bluetooth 3 x RP-SMA connector hole for WLAN 2 x SMA connector hole for WWAN 1 x SMA connector for GNSS 1 x Ground connector
Mechanical Cooling system: fanless Enclosure: metal Mounting: open frame mount, VESA 75 mount Dimension: 309 x 230.6 x 67.7 mm Cutout dimension: 212.2 x 159.4 mm Weight: 3.0 kg
Power Management 24/36V DC (14 ~ 48VDC) in, w/o isolation 24/110V DC in, w/ isolation (BOM optional) Reverse protection, OCP & UVP Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software 10~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Environment Operating temperatures
- EN 50155, class OT3 (-30°C~70°C), 85°C for 10 minutes (w/ 9W TDP CPU, industrial SSD) with air flow
Storage temperatures: -40°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random) 2g@5~500 Hz (in operation, SSD) Vibration
- Operating: MIL-STD-810H, 514.8C Procedure 1, Category 4
- Storage: MIL-STD-810H, 514.8E Procedure 1, Category 24
Shock
- Operating: MIL-STD-810H, Method 516.6, Procedure I, trucks and semi-trailers = 40g
- Crash hazard: MIL-STD-810H, Method 516.6, Procedure V, ground equipment = 75g
Operating System Windows 10/Windows 11 Linux
Standards/Certifications CE FCC Class A EN 50155: 2017
- Ambient temperature EN 50155, Class OT3 (-30°C~70°C)
- Interruptions of voltage supply class S1
- Supply change over class C1, C2
- EMC EN 50121-1: 2017, EN 50121-3-2: 2016+A1: 2019
- Environment EN 60068-2-1, EN 60068-2-2, EN 60068-2-30
- Shock and vibration IEC 61373 Class B
- Protective coating class PC1 (PC2, by request)
EN 45545-2: 2020 (PCB)
Add to Inquiry
Take a minute and tell us what you think!