VTC 6210-R

Intel® Atom™ E3845 Fanless Rolling Stock Computer with EN50155 Conformity
  • Main Feature
  • Intel® Atom™ processor quad core E3845, 1.91GHz
  • Three SIM cards + dual WWAN modules support
  • Built-in u-blox-M8 GPS
  • Built-in CAN Bus 2.0B
  • Wake on RTC/SMS via WWAN moduleWake on RTC/SMS via WWAN module
  • EN50155 conformity
  • 3 x mini-PCIe socket expansion
  • 4 x DI + 4 x DO w/ isolation
  • 2 x RS232 + 1 x RS422/485 w/ isolation
  • Voice communication via WWAN module
  • 3KVDC Power Isolation Protection (VTC6210-RF Only)
Add to Inquiry
Datasheet(PDF)
CPU Intel® Atom™ processor quad core E3845, 1.91GHz
Memory 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 2GB
Storage 1 x 2.5" SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available) 1 x CFast (externally accessible)
Expansion 1 x Full size mini-PCIe socket (USB 2.0) for LTE module with 2 x external SIM 1 x Full size mini-PCIe socket (USB 2.0, PCIe 2.0) for LTE module with 1 x internal, 1 x external SIM 1 x Full size mini-PCIe socket (USB 2.0, PCIe 2.0)
Function 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Reckoning Built-in G-sensor
I/O Interface-Front 4 x LED for power, storage, WWAN, WLAN 2 x Externally accessible SIM card socket (selectable) 1 x Phone jack 3.5mm for 1 x Mic-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x Externally accessible 2.5" SATA 2.0 SSD/HDD tray 1 x Externally accessible CFast card socket with cover 1 x Reset button 1 x Type A USB 3.0 compliant host, supporting system boot up 4 x Antenna hole for WWAN/WLAN/BT 1 x Antenna hole for GPS
I/O Interface-Rear 1 x Circle Type DC Input 9~60VDC with ignition and typical 19W power consumption
- 24VDC (16.8~31.2V), non-isolation
- 36VDC (25.2~46.8V), non-isolation
- 110VDC (77~143V), w/ 3KVDC isolation
1 x M12 with two USB 2.0 compliant host, supporting system boot up 2 x M12 10/100/1000 Ethernet 1 x Phone jack 3.5mm for 1 x Mic-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz 1 x DP port, resolution up to 2560 x 1600 @60H 2 x DB-9 RS-232 (isolation) 1 x DB-9 RS-422/485 (isolation) 1 x 16-pin terminal block
- 1 x CAN Bus 2.0B (on board)
- 4 x DI, 4 x DO with isolation
Input Voltage (internal type): 5VDC TTL (default)
Input Voltage (source type): 3~12VDC (Programmable Digital output or optional isolation)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3~19VDC, max current: 150mA
Power Management Power input 24/36VDC w/o isolation, 110VDC w/ isolation Ignition On/Off control Programmable On/Off delay timer System wake up event
- Ignition switch
- RTC timer ALARM interrupt
- Cellular MODEM wakeup signal
System wake up condition
- Wake up event is triggered, and DC input voltage is greater than UVP threshold
- Timer delay is only applicable for ignition on
System power down condition
- Soft off, or ignition off
Timer delay is only applicable for ignition off
Operating System Windows 8, WES8 Window 7, WES7 Linux kernel 3.X
Dimensions 260mm (W) x 176mm (D) x 70mm (H) (10.24" x 6.93" x 2.75") Weight: 2.5kg
Environment Operating temperatures:
-40°C to 70°C (w/ industrial SSD) with air flow
-20°C to 50°C (w/ commercial HDD) with air flow
Storage temperatures: -40°C to 85°C Relative humidity: 10% to 90% (non-condensing) Shock (SSD/HDD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/Certifications CE FCC Class A EN 50155: 2017
- Ambient temperature EN 50155, Class OT4 (-40~70°C), 85°C for 10 minutes
- Interruptions of voltage supply class
- Supply change over class C1, C2
- EMC EN 50121-3-2: 2016
- Environment EN 60068-2-1, EN 60068-2-2
- Shock and vibration IEC 61373 Class B
- Protective coating class PC1 (PC2, by request)
EN 45545-2: 2013+A1:2015
Add to Inquiry
Take a minute and tell us what you think!