ATC 3563-NA8C/NAA8CR

NVIDIA Jetson Orin Nano™ Solution Accelerated Edge AI Computer
  • Main Feature
  • Built-in NVIDIA Jetson Orin Nano™ SoM, up to 67 INT8 Sparse TOPS AI performance in Super Mode
  • The rugged, compact with fanless design
  • 8 x GbE PoE+ (120W in total) for IP CAM & LiDAR sensors
  • HEVC/H.265 hardware decode, supports up to 11 x 1080p@30fps
  • Wide range operating temperature of -25°C~60°C (fanless in Super mode)
  • Ultra-speed PCIe 4.0 x4 NVMe SSD for data integrity
  • Expansible for GNSS, LTE/5G NR & Wi-Fi 5/6
  • DC 9V~36V/24V rail with ignition control and OCP/OVP
  • NEXCOM Acceleration Linux (NAL) OS w/ JetPack 6.2 integrated
  • Military standard of MIL-STD-810H for anti-vibration/shock
  • CE/FCC UKCA, E-mark, EN 50155 & EN 45545-2 certified
Add to Inquiry
Datasheet(PDF)
NVIDIA Jetson Orin Nano™ SoM NVIDIA Jetson Orin Nano™ 8GB
-CPU: 6-core Arm® Cortex®-A78AE v8.2 64-bit, 1.5MB L2 + 4MB L3
-GPU: 1024-core NVIDIA® Ampere architecture with 32 Tensor Cores
-Memory: 8GB 128-bit LPDDR5 102GB/s, 2133/3199MHz in frequency
-AI performance: 67 TOPS in Super Mode OpenGL 4.6, OpenGL ES 3.2, CUDA® 11.4 and Vulkan 1.1 260-pin SO-DIMM form factor compatible with Orin™ NX NVIDIA® JetPack 6.2
Storage 1 x M.2 Key M 2280 PCIe 3.0 x4 NVMe SSD, 128GB in default
Expansion Slot 1 x M.2 Key E 2230 (PCIe 4.0 + USB 2.0) 1 x M.2 Key B 3042/3052 (USB 3.2/2.0) with 2 x nano-SIM slot
Display Interface 1 x HDMI® 2.0a/b, up to 3840x2160@60Hz
G-Sensor 3D accelerometer and 3D gyroscope, ST LSM6DSLTR
Remote Power Trigger ATX power button, wafer reserved
PoE+ 8 x 1GbE RJ45 port (ATC 3563-NA8C)/M12 X-coded connector (ATC 3563-NAA8CR) 9K byte Jumbo frame, PTP (IEEE 1588) support Switching: 2 x Realtek RTL8367RBI-VH-CG-I IEEE 802.11af/at PoE (120W power budget) PSE on/off & Watt monitoring
USB 2 x USB 3.2, Type-A
-5V@900mA each
-up to 5Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed) 1 x OTG Micro-USB (w/ a door) 1 x USB 2.0, wafer reserved
Serial Port 1 x RS-232 (Tx, Rx)
-RS-232 working voltage ± 9V, baud rate up to 115.2kb/s
-Connector: MULTI-port (DB15) 1 x Console port (Tx, Rx), wafer reserved
DI/DO 4-Bit input, isolation
-Source: DC 9V~36V (12V@0.6mA/24V@1.2mA)
-External: DC 0V~33V pull-high, high-level, DC 3.3V~33V; low-level, DC 0V~2V 4-Bit output, isolation
-Source: DC 9V~36V (nominal 35mA@24V)
-External: DC 5V~27V pull-high, sink current w/ 220mA for each bit, 500mA max (@25C) Source or external can be selected by software (default: source type) Connector: MULTI-port (DB15)
CAN bus 1 x CAN FD, compatible with CAN 2.0A/2.0B IEC 61000-4-2 Electrostatic Discharge (ESD): ± 4KV/8KV (contact/ air, whole system) Up to 5Mb/s in data transmit, 2.5KV isolated Connector: MULTI-port (DB15)
GPS Onboard u-blox NEO-M9N GNSS module for GPS/GLONASS/QZSS/ Galileo/Beidou Optional NEO-M9V w/ DR (dead reckoning) function
Power Management Nominal voltage: DC 9V~36V/24V rail
-ATC 3563-NA8C: DC 9V~36V, cranking voltage of DC 6V~9V (less than 20 sec), terminal block
-ATC 3563-NAA8CR: DC 24V (14.4V~33.6V), K-coded OCP & UVP (shut down once exceeding 37V) Ignition on/off control & programmable on/off delay timer Optional for remote power on/off control
I/O Interface Front 6 x LED indicator 1 x Reset button 2 x nano-SIM slot, 1 x OTG 1 x HDMI® 2 x USB 3.2 1 x MULTI-port (DB15)
I/O Interface Rear 9V~36V/24V rail DC-in, terminal block/K-coded (ATC 3563-NA8C/ NAA8CR) 8 x 1GbE PoE+ RJ45/X-coded (ATC 3563-NA8C/NAA8CR)
II/O Interface Side 4 x Antenna hole for LTE/5G module (SMA ant.) 2 x Antenna hole for Wi-Fi 5/6 module (PR-SMA ant.) 1 x Antenna hole for GNSS (RP-SMA ant.)
Mechanical ATC 3563-NA8C:
-Dimensions: 284mm (W) x 155mm (D) x 74.5mm (H) (w/ mount bracket)
-Weight: 3.2kg ATC 3563-NAA8CR:
-Dimensions: 284mm (W) x 155mm (D) x 74.5mm (H) (w/ mount bracket)
-Weight: 3.3kg
Environment Operating temperature: -25°C~60°C (Super Mode) Storage temperature: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibration in operating
-MIL-STD-810G, 514.8C, Procedure 6, Category 4
-IEC 60068-2-64: 2.0g@5Hz~500Hz
-MIL-STD-810G, 514.6E, Procedure 1, Category 24, 7.7g approx. Shock
-Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
-Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE/FCC, UKCA, E-mark, EN 50155, and EN 45545-2
Operating System NEXCOM Aided Linux (NAL) w/ Jetpack 6.2 integrated
-NEXCOM custom functions (GNSS, 5G NR, 6-axis sensor, MCU control)
-V4L2
-Ubuntu 22.04@Kernel 5.15
Accessories External cable: MULTI-port adapter cable, 20cm
Add to Inquiry
Take a minute and tell us what you think!