ATC 3560-IP7-NXAI4CR

NVIDIA Jetson Orin™ NX Solution Accelerated Edge AI Computer
  • Main Feature
  • Edge AI rail computer
  • Built-in NVIDIA Jetson Orin™ NX SoM, up to 100 INT8 Sparse TOPS AI performance
  • 4 x GbE PoE+ port for IP CAM/LiDAR sensors
  • HEVC/H.265 hardware codec, 18 x 1080p30 compute power (decoded)
  • The rugged, fanless design with full IP67 rating
  • Ultra-speed PCIe 4.0 x4 NVMe SSD for data integrity, 128GB SSD in default
  • NEXCOM Acceleration Linux (NAL) OS w/ JetPack 6.2 integrated
  • Expansible for LTE/5G NR & Wi-Fi 5/6
  • 24V rail DC-in with ignition control & OCP/OVP
  • CE/FCC, UKCA, and EN 50155 certified
Add to Inquiry
Datasheet(PDF)
NVIDIA Jetson Orin™ NX SoM NVIDIA Jetson Orin™ NX 8GB
-CPU: 6-core Arm® Cortex®-A78AE v8.2 64-bit 1.5MB L2 + 4MB L3
-GPU: 1024-core NVIDIA® Ampere architecture with 32 Tensor Cores
-Memory: 8GB 128-bit LPDDR5 102.4GB/s
-AI performance: 70 INT8 Sparse TOPS NVIDIA Jetson Orin™ NX 16GB
-CPU: 8-core Arm® Cortex®-A78AE v8.2 64-bit CPU 2MB L2 + 4MB L3
-GPU: 1024-core NVIDIA® Ampere architecture with 32 Tensor Cores
-Memory: 16GB 128-bit LPDDR5 102GB/s, 3200MHz in frequency
-AI performance: 100 INT8 Sparse TOPS OpenGL 4.6, OpenGL ES 3.2, and Vulkan 1.1 NVIDIA JetPack™ 6.2
Storage 1 x M.2 Key M 2280/3080 PCIe 3.0 x4 NVMe SSD, 128GB in default
Expansion Slot 1 x Full-size Mini PCIe slot (PCIe 4.0 + USB 2.0) 1 x M.2 Key B 3042/3052 (USB 3.2) with 2 x micro-SIM slot
Display Interface 1 x HDMI® 2.0a/b, up to 3840x2160@60Hz
G-Sensor 3D accelerometer and 3D gyroscope, ST LSM6DSLTR
Remote Power Trigger ATX power button, wafer reserved
GbE 1 x 1GbE M12 X-coded connector
-9Kbyte Jumbo frame, PTP (IEEE 1588) supported
-Controller: Intel® I210-IT
PoE+ 4 x 1GbE M12 X-coded PoE+ connector
-IEEE 802.3af/at compliant
-30W (4-port) power budget in total
-PoE on/off and power Watt monitoring
-The cap is pre-installed
USB 2 x USB 3.2, Type-A
-5V@900mA each
-up to 5Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed) 1 x OTG Micro-USB, 2 x USB 2.0 wafer-type (reserved)
Serial Port 1 x RS-232 (Tx, Rx, CTS, RTS) 1 x RS-232 (Tx, Rx) 1 x Console port (Tx, Rx) RS-232 working voltage ± 9V, baud rate up to 115.2kb/s Connector: MULTI port (M12 A-coded)
DI/DO (reserved) 4-Bit input
-Source: DC 9V~36V (12V@0.6mA/24V@1.2mA)
-External: DC 0V~33V pull-high, high-level, DC 3.3V~33V; low-level, DC 0V~2V 4-Bit output
-Source: DC 9V~36V (nominal 35mA@24V)
-External: DC 5V~27V pull-high, sink current w/ 220mA for each bit, 500mA max (@25C) Source or external can be selected by software (default: source type)
CAN bus 1 x CAN 2.0A/2.0B IEC 61000-4-2 Electrostatic Discharge (ESD): ± 4KV/8KV (contact/ air, whole system) 2.5KV isolated Connector: MULTI port (M12 A-coded)
GPS u-blox NEO-M9N GNSS module for GPS/GLONASS/QZSS/Galileo/Beidou Optional DR (dead reckoning) function, NEO-M9V
Power Management Nominal voltage: DC 24V for rail Ignition on/off control & programmable on/off delay timer
I/O Interface Front 12 x LED indicator 1 x Reset button 1 x OTG 2 x micro-SIM slot, 1 x HDMI®, 2 x USB 3.2 2 x Antenna hole for LTE/5G module (SMA ant.)
I/O Interface Rear Rail 24V DC-in, S-coded 4 x 1GbE M12 X-coded PoE connector 1 x 1GbE M12 X-coded connector 1 x M12 MULTI-port (2 x RS-232, 1 x console, 1 x CAN)
I/O Interface Side 2 x Antenna hole for Wi-Fi 5/6 module (PR-SMA ant.) 2 x Antenna hole for LTE/5G module (SMA ant.) 1 x Antenna hole for GNSS (RP-SMA ant.)
Mechanical Dimensions: 213mm (W) x 167mm (D) x 122.8mm (H) (w/ mount bracket) Weight: 3.2kg
Environment Operating temperature: EN 50155, class OT3 (-35°C~70°C), 85°C for 10 minutes (w/ 30W PoE) Storage temperature: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibration in operating
-MIL-STD-810H, Method 514.8C, Procedure 1, Category 4, common carrier US highway truck vibration exposure Shock (SSD)
-Operating: MIL-STD-810H, Method 516.8, Procedure I, functional shock=40g
-Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash hazard shock test=75g
Certifications CE approval, FCC Class A, UKCA EN 50155 Class OT3
Operating System NEXCOM Aided Linux (NAL) w/ Jetpack 6.2 integrated
-NEXCOM custom functions (GNSS, 5G NR, 6-axis sensor, MCU control)
-Ubuntu 22.04@Kernel 5.15
Accessories External cable:
-Power extension cable, 20cm
-M12 MULTI-port adapter cable, 20cm
Add to Inquiry
Take a minute and tell us what you think!