ATC 3560-IP7-NX4CF

NVIDIA® Jetson Orin™ NX Solution Accelerated Edge AI Computer
  • Main Feature
  • Built-in NVIDIA Jetson Orin™ NX SoM, up to 157 INT8 Sparse TOPS AI performance in Super Mode
  • 4 x GbE PoE+ port for IP CAM/LiDAR sensors
  • HEVC/H.265 hardware codec, 18 x 1080p30 compute power (decoded)
  • Wide range operating temperature of -25°C~60°C (fan kit, in Super Mode)
  • The rugged, fankit design with full IP67 rating
  • Ultra-speed PCIe 4.0 x4 NVMe SSD for data integrity, 128GB SSD in default
  • NEXCOM Acceleration Linux (NAL) OS w/ JetPack 6.2 integrated
  • Expansible for LTE/5G NR & Wi-Fi 5/6
  • 9V~36V DC-in with ignition control & OCP/UVP
  • CE/FCC, UKCA, and E-mark certified
Add to Inquiry
Datasheet(PDF)
NVIDIA Jetson Orin™ NX SoM NVIDIA Jetson Orin™ NX 8GB
-CPU: 6-core Arm® Cortex®-A78AE v8.2 64-bit 1.5MB L2 + 4MB L3
-GPU: 1024-core NVIDIA® Ampere architecture with 32 Tensor Cores
-Memory: 8GB 128-bit LPDDR5 102.4GB/s
-AI performance: 117 INT8 Sparse TOPS in Super Mode NVIDIA Jetson Orin™ NX 16GB
-CPU: 8-core Arm® Cortex®-A78AE v8.2 64-bit CPU 2MB L2 + 4MB L3
-GPU: 1024-core NVIDIA® Ampere architecture with 32 Tensor Cores
-Memory: 16GB 128-bit LPDDR5 102GB/s, 3200MHz in frequency
-AI performance: 157 INT8 Sparse TOPS in Super Mode OpenGL 4.6, OpenGL ES 3.2, and Vulkan 1.1 260-pin SO-DIMM form factor compatible with Xavier NX/TX2 NVIDIA JetPack™ 6.2
Storage 1 x M.2 Key M 2280/3080 PCIe 3.0 x4 NVMe SSD, 128GB in default
Expansion Slot 1 x Full size Mini PCIe slot (PCIe 4.0 + USB 2.0) 1 x M.2 Key B 3042/3052 (USB 3.2) with 2 x micro-SIM slot
Display Interface 1 x HDMI® 2.0a/b, up to 3840x2160@60Hz
G-Sensor 3D accelerometer and 3D gyroscope, ST LSM6DSLTR
Remote Power Trigger ATX power button, wafer reserved
GbE 1 x GbE port, X-coded
-9Kbyte Jumbo frame, PTP (IEEE 1588) supported
-Controller: Intel® I210-IT
PoE+ 4 x GbE PoE+ port, X-coded
-IEEE 802.3af/at compliant
-30W (4-port) power budget in total
-PoE on/off and power Watt monitoring
-The cap is pre-installed
USB 2 x USB 3.2, Type-A
-5V@900mA each
-up to 5Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed) 1 x OTG Micro-USB, 2 x USB 2.0 wafer-type (reserved)
Serial Port 1 x RS-232 (Tx, Rx, CTS, RTS) 1 x RS-232 (Tx, Rx) 1 x Console port (Tx, Rx) RS-232 working voltage ± 9V, baud rate up to 115.2kb/s Connector: MULTI port (M12 A-coded)
DI/DO (reserved) 4-Bit input
-Source: DC 9V~36V (12V@0.6mA/24V@1.2mA)
-External: DC 0V~33V pull-high, high-level, DC 3.3V~33V; low-level, DC 0V~2V 4-Bit output
-Source: DC 9V~36V (nominal 35mA@24V)
-External: DC 5V~27V pull-high, sink current w/ 220mA for each bit, 500mA max (@25C) Source or external can be selected by software (default: source type)
CAN bus 1 x CAN 2.0A/2.0B IEC 61000-4-2 Electrostatic Discharge (ESD): ± 4KV/8KV (contact/air, whole system) 2.5KV isolated Connector: MULTI port (M12 A-coded)
GPS u-blox NEO-M9N GNSS module for GPS/GLONASS/QZSS/Galileo/Beidou Optional DR (dead reckoning) function, NEO-M9V
Power Management Nominal voltage: DC 9V~36V Cranking voltage: 6V~9V (less than 20 sec) OCP & UVP (shut down once exceeding 37V) Ignition on/off control & programmable on/off delay timer Optional for remote power on/off trigger (wafer reserved)
I/O Interface Front 12 x LED indicator 1 x Reset button 1 x OTG 2 x micro-SIM slot, 1 x HDMI®, 2 x USB 3.2 2 x Antenna hole for LTE/5G module (SMA ant.)
I/O Interface Rear 9V~36V DC-in, S-coded 4 x GbE PoE & 1 x GbE, X-coded M12 MULTI port (2 x RS-232 & 1 x console, 1 x CAN)
I/O Interface Side 2 x Antenna hole for Wi-Fi 5/6 module (PR-SMA ant.) 2 x Antenna hole for LTE/5G module (SMA ant.) 1 x Antenna hole for GNSS (RP-SMA ant.)
Mechanical ATC 3560-IP7-NX4CF:
-Dimensions: 213mm (W) x 167mm (D) x 104mm (H)
-Weight: 2.5kg ATC 3560-IP7-NX4C:
-Dimensions: 213mm (W) x 167mm (D) x 82.2mm (H)
-Weight: 2.3kg
Environment Operating temperature:
-ATC 3560-IP7-NX4CF: -25°C~60°C (fan kit, in Super Mode, w/ 30W PoE)
-ATC 3560-IP7-NX4C: -25°C~60°C (fanless, in Normal Mode, w/ 30W PoE) Storage temperature: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibration in operating
-MIL-STD-810G, 514.6C, Procedure 3, Category 4
-IEC 60068-2-64: 2.0g@5Hz~500Hz
-MIL-STD-810G, 514.6E, Procedure 1, Category 24, 7.7g approx. Shock
-Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
-Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval, FCC Class A, UKCA E13
Operating System NEXCOM Aided Linux (NAL) w/ Jetpack 6.2 integrated
-NEXCOM custom functions (GNSS, 5G NR, 6-axis sensor, MCU control)
-Ubuntu 22.04@Kernel 5.15
Accessories External cable:
-Power extension cable, 20cm
-M12 MULTI-port adapter cable, 20cm
Add to Inquiry
Take a minute and tell us what you think!