ATC 8120-C4F

Intel® Core™ Processor (Series 2) with AI Inference Accelerator for Autonomous and Machine Vision
  • Main Feature
  • Powered by AI inference accelerator for in-vehicle applications
  • Configurable for up to 600W discrete graphics card
  • Built-in high performance Intel® Core™ Processor (Series 2)
  • Support up to total 4 PCIe 5.0/4.0 x16/x8/x4 slots for expansion
  • Ultra speed M.2 Key M NVMe & 4 x 2.5” SSD for data integrity
  • RAID 0/1/5/10 configurable for data secure
  • DC 9V~36V input with ignition control & OCP/UVP
  • 4 x 2.5GbE PoE, up to PoE++ (IEEE 802.3bt) support
  • Rich communication ports: 6 x USB 3.2, 2 x CAN FD, and 4 x UART
  • Telemetric functionality with 2 x WWAN/5G NR, 1 x WLAN, and GNSS/DR/RTK support
  • Military standard of MIL-STD-810H for anti-vibration/shock
  • CE/FCC, UKCA, and E-mark certified
Add to Inquiry
Datasheet(PDF)
Processor Intel® Core™ 7/5/3 processor 251E/221E/201E, TDP up to 65W
Chipset Intel® R680E
Memory 2 x DDR5 SO-DIMM, ECC, up to 96GB, 48GB per DIMM, default 8GB
Storage 4 x 2.5” SATA 3.0 SSD (15mm height), removable 1 x M.2 Key M 2280 NVMe SSD (PCIe 4.0 x4)
Expansion Slot 1 x Full size Mini PCIe 3.0 x2 slot (USB 3.2, USB 2.0)
-Option for M.2 Key B (2 x nano-SIM) 1 x M.2 Key E (PCIe 3.0 x1, USB 2.0)
-Support Wi-Fi 5/6 module 2 x M.2 Key B 3042/3052 (USB 3.2, USB 2.0)
-Support LTE/5G NR module 1 x PCIe 5.0 x16 3.5 slot-width
-For discrete graphics card 2 x PCIe 4.0 x8 slot 1 x PCIe 4.0 x4 slot
Dedicated GPU (optional) Up to NVIDIA® GeForce RTX™ 5090, 600W
Sensor GNSS: u-blox NEO-M9N GNSS module for GPS/GLONASS/QZSS/Galileo/Beidou Optional modules with dead reckoning/RTK available MEMS: 3D accelerometer and 3D gyroscope, ST LSM6DSLTR
System Capabilities TPM 2.0: Infineon SLB 9672VU2.0 FW15.23
Display Interface 1 x VGA, up to 1920x1200@60Hz 2 x HDMI® 2.1, up to 4096x2304@60Hz
CAN bus (isolation) 2 x CAN FD, compatible with CAN 2.0A/2.0B Up to 5Mb/s in data transmit, 2.5KV isolated IEC 61000-4-2 Electrostatic Discharge (ESD): ± 6KV/8KV (contact/air) ISO 11898-1/11898-2 ESD: ± 8KV/15KV (contact/air), 2.5KV isolated
DI/DO (isolation) 4-Bit input
-Source: DC 9V~36V (12V@1.1mA/24V@2.2mA)
-External: DC 0V~33V pull-high, high-level, DC 3.3V-33V; low-level, DC 0V-2V 4-Bit output
-Source: DC 9V~36V (nominal 35mA@24V):
-External: DC 5V~27V pull-high, sink current w/ 220mA for each bit, 500mA max (@25C) Source or external can be selected by software (default: source type)
Serial Port 2 x COM port (DB9, COM1, COM2), supports full RS-232/422/485 2 x COM port (DB9, COM3, COM4), supports full RS-232 RS-232 working voltage, ± 9V, baud rate up to 115.2kb/s 2-wire/4-wire RS-485 (Baud rate: 300~115.2Kbps) 1 x UART for RTK signal, wafer reserved
Power Management 9V~36V DC-in Setting 8-level power on/off delay time by software Reverse protection, OCP & UVP Ignition on/off control/programmable on/off delay timer Connector: 6-pin terminal block, a 2-pin conn. for IGN control
I/O Interface Front 1 x 6-pin terminal block for 9V~36V DC-IN 1 x 2-pin mini-fit for IGN control 1 x ATX power button 1 x Reset button 8 x LED indicator for power/storage/WLAN/WWAN/PoE 4 x 2.5” SSD tray 2 x USB 3.2 Gen 2, Type-A, 5V/900mA
-Lock hole reserved
Up to 10Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed) 2 x COM port (DB9, COM1, COM2) 2 x COM port (DB9, COM3, COM4) 1 x VGA (DB15) 1 x DC out, 12V/3A, terminal block 6 x SMA antenna hole 2 x USB 2.0, wafer reserved, 5V/500mA
I/O Interface Rear 4 x USB 3.2 Gen 2, Type-A, 5V/900mA
-Lock hole reserved
-Up to 10Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed) 2 x HDMI® 1 x MULTI-port (DI/DO + CAN FD), DB15 4 x 2.5GbE RJ45 PoE port (LAN1~LAN4, 80W power budget), 1 x 1GbE RJ45 port (LAN5)
-IEEE 802.3af/at/bt (LAN1~LAN4, LAN1 supports IEEE 802.3bt)
-9K byte jumbo frame
-Support PTP (IEEE 1588)
-Controller/PHY: Intel® I226-I (LAN1~LAN4), Intel® I219-LM (LAN5)
-Support vPro (iAMT) & WoL: LAN5 1 x PCIe x16 slot 2 x PCIe x8 slot 1 x PCIe x4 slot 1 x GNSS antenna 4 x SMA antenna hole 1 x Line out: unbalance stereo, left & right channel, audio jack
-Audio codec: REALTEK ALC888S-VD2-GRALC888S 1 x Mic in, audio jack 1 x Line in, stereo, wafer reserved
I/O Interface Top 2 x Nano SIM slot, one additional in option
Vibration & Shock Vibration in operating:
-MIL-STD-810H, 514.8C Procedure 6, Category 4
-IEC 60068-2-64: 2.0g@5Hz~500Hz Vibration in storage:
-MIL-STD-810H, 514.8E Procedure 1, Category 24, 7.7g Shock:
-MIL-STD-810H, 516.8 Procedure I, trucks and semi-trailers=40g
-Crash hazard: Procedure V, ground equipment=75g
Mechanical Dimensions: 296mm (W) x 220mm (D) x 435mm (H) w/ mount bracket Weight: 8kg (bare bone)
Environment Operating temperature: -30°C~70°C (w/ 80W PoE, fan kit, w/o graphics card) Operating temperature: -30°C~55°C (w/ 80W PoE, fan kit, w/ 600W graphics card) Storage temperature: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Certifications CE approval, FCC Class A, UKCA, and E-mark certified
Operating System Windows 11 Windows 10, 64-bit Windows 10 IoT, 64-bit Linux (Ubuntu 22.04, Linux 5.19)
Add to Inquiry
Take a minute and tell us what you think!