nROK 6222

Fanless 4-CH PoE Rolling Stock Computer with Intel Atom® x7-E3950 Processor
  • Main Feature
  • Intel Atom® x7-E3950 processor, 1.60 GHz
  • 4 x PoE (802.3af/at, up to 60W)
  • Built-in u-blox-M8N GPS
  • Three video outputs, one VGA and two HDMI®
  • EN 50155, class OT4 conformity
  • 2 x Mini PCIe slot expansion
  • Dual external storage (compatible with 15mm disk)
  • 1 x USB DOM to run OS
  • 1 x SD card for exporting and backing up data
  • Optional power isolation kit supported
Add to Inquiry
Datasheet(PDF)
Processor Intel Atom® x7-E3950 processor, TDP 12W
Memory 1 x DDR3L 1866 SO-DIMM, up to 8GB, default 4GB
Integrated Graphics Intel® HD Graphics 505
Display Interface 2 x HDMI® 1.4b, up to 4096x2160@30Hz 1 x VGA, up to 1920x1200@60Hz
Storage 2 x 2.5” SATA 3.0 external SSD (compatible with 15mm disk) 1 x SD memory card 3.0 (externally accessible) 1 x USB EDC for USB DOM
Expansion Slot 1 x M.2 Key B 3042 (USB 2.0, USB 3.2) for an LTE module, BOM optional full-size Mini PCIe slot (USB 2.0) for an LTE/5G NR module with 2 x external SIM 1 x Full-size Mini PCIe slot (USB 2.0, PCIe 2.0) 1 x Half-size Mini PCIe slot (USB 2.0, PCIe 2.0)
Sensor 1 x Default u-blox NEO-M8N GNSS for GPS/GLONASS/QZSS/Galileo/Beidou G Sensor (3-axis, 10-bit resolution)
System Capabilities TPM 2.0: Infineon SLB 9665TT2.0 FW5.62 (BOM optional)
I/O Interface Front 12 x LED indicator (including 3 x programmable LED) 2 x Externally accessible SIM card slot with cover 2 x 2.5" removable SSD tray 1 x Externally accessible SD card slot with cover 1 x Reset button 1 x Power button 1 x USB 3.2, Type-A (5V/0.9A) 2 x HDMI® 1.4b 1 x 6-pin M8 connector for 1 x Mic in (mono), 1 x Line out (stereo) 2 x SMA antenna
I/O Interface Rear 1 x 5-pin M12 connector for power input with ignition
-DC 24V/36V (9V~48V), non-isolation
1 x 1GbE M12 X-coded connector, Intel® I210-IT 4 x 1GbE M12 X-coded PoE connector, Intel® I210-IT, 802.3af/at, up to 60W 1 x VGA 1 x M12 connector for 2 x USB 2.0 1 x COM port (DB9), supports RS-232 (full, isolation) 3 x SMA antenna 1 x DIO port (DB15)
-4 x DI with isolation
-4 x DO with isolation
-Vin, GND for GPIO
1 x MULTI port (DB15)
-1 x RS-422/485
-1 x RS-232 (Tx/Rx)
-1 x CAN 2.0B
Power Management DC 24/36V power input w/o isolation Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Support S3/S4 suspend mode 10~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 10, 64bit Linux
Mechanical Dimensions: 260mm (W) x 196mm (D) x 66.5mm (H) Weight: 3.4kg
Environment Operating temperature
-EN 50155, class OT4 (-40°C~70°C), 85°C for 10 minutes (w/ industrial SSD) with air flow
Relative humidity: 10%~90% (non-condensing) Vibration (random)
-2g@5Hz~500Hz (in operation, SSD)
Vibration (SSD)
-Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
-Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD)
-Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=40g
-Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE FCC Class A EN 50155:2017
- Ambient temperature EN 50155, Class OT4 (-40°C~70°C), 85°C for 10 minutes
- Interruptions of voltage supply class S1
- Supply change over class C1, C2
- EMC EN 50121-3-2: 2016
- Environment EN 60068-2-1, EN 60068-2-2, EN 60068-2-30
- Shock and vibration IEC 61373 Class B
- Protective coating class PC1 (PC2, by request)
EN 45545-2:2013+A1:2015 (PCB)
Add to Inquiry
Take a minute and tell us what you think!