nROK 6231 Series

Intel Atom® x7433RE Fanless Rolling Stock Computer with EN 50155
  • Main Feature
  • Intel Atom® x7433RE processor, TDP 9W
  • Support Eight SIM cards + four WWAN modules
  • Built-in u-blox-M9N GPS
  • Built-in CAN FD
  • 1 x External storage (compatible with 15mm disk)
  • EN 50155, class OT4 conformity
  • 3 x M.2 + 2 x Mini PCIe slot expansion
  • Isolated DC 24/110V power input (nROK 6231-AI/nROK 6231-FI)
  • 1 x DB9 for 1 x Mic in, 1 x Line out, 1 x Line In
  • Three video outputs: one VGA, one HDMI®, and one DP
Add to Inquiry
Datasheet(PDF)
Processor Intel Atom® x7433RE processor, TDP 9W
Memory 1 x DDR5 SO-DIMM, up to 16GB, default 8GB
Video Output 1 x VGA, up to 1920x1200@60Hz 1 x HDMI® 2.0, up to 4096x2160@60Hz 1 x DP, up to 4096x2160@60Hz
Storage 1 x 2.5” SATA 3.0 external SSD (compatible with 15mm drive) 1 x mSATA (occupies one Mini PCIe slot)
Expansion Slot 2 x M.2 Key B 3042/3050/3052 (USB 2.0, USB 3.2 Gen 2)
-Support LTE/5G NR modules with 2 x external nano-SIM 1 x Full-size Mini PCIe slot (USB 2.0, SATA, PCIe 3.0)
-Support mSATA (default), BIOS select (USB 2.0) for LTE with 2 x external nano-SIM
-BOM option (USB 2.0, PCIe 3.0) for WLAN, LAN2 will be disabled 1 x M.2 Key E 2230 (PCIe 3.0 x1, USB 2.0)
-BOM optional Mini PCIe (PCIe 3.0 x1, USB 2.0) for Hailo module 1 x Full-size Mini PCIe slot (USB 2.0, PCIe 3.0)
-Support a Wi-Fi module
-BOM optional M.2 Key B 3042/3050/3052 (USB 2.0, USB 3.2 Gen 2) for an LTE/5G NR module with 2 x external nano-SIM
Sensor 1 x Default u-blox NEO-M9N GNSS for GPS/GLONASS/QZSS/Galileo/Beidou 1 x 3D accelerometer and 3D gyroscope
System Capabilities TPM 2.0: Infineon SLB 9670VQ2.0
I/O Interface Front 12 x LED indicator (including 2 x programmable LED) 8 x Externally accessible SIM slot with cover 1 x 2.5" SSD tray (removable, 15mm) 1 x Reset button 1 x Power button 2 x USB 3.2 Gen 2, Type-A 1 x SMA connector for GNSS 8 x SMA connector hole for WWAN 5 x RP-SMA connector hole for WLAN
I/O Interface Rear 1 x Circle type DC input with ignition
-DC 24V (DC 9V~36V), non-isolation 1 x M12 A-coded connector with two USB 2.0 2 x 2.5GbE M12 X-coded connector, Intel® I226-IT 1 x COM port (DB9), female for 1 x Mic in, 1 x Line out, 1 x Line in 1 x VGA, 1 x HDMI® 2.0, 1 x DP 1 x COM port (DB9), supports RS-232 full (isolated) 2 x COM port (DB9), supports RS-232/422/485 full (isolated) 1 x 18-pin terminal block
-1 x CAN FD (isolated)
-4 x DI with isolation
-4 x DO with isolation
-1 x GNSS speed/direction
-DC 12V/2A output
-Vin, GND for GPIO
Power Management DC 24V power input w/o isolation Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Support S3/S4 suspend mode Support 10~255 seconds WDT, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 11 Windows 10, 64bit Linux 4.x
Mechanical Dimensions: 260mm (W) x 196mm (D) x 70mm (H) (10.24" x 7.79" x 2.75") Weight: 2.8kg
Environment Temperature:
--40°C~70°C, 85°C for 10 minutes (w/ industrial SSD) with air flow
-Storage temperature: -40°C~85°C Relative humidity: 10%~90% (non-condensing) Vibration (random)
-2g@5Hz~500Hz (in operation, SSD) Vibration
-IEC 60068-2-64, 2G for SSD
-Operating: MIL-STD-810H, 514.8C Procedure 1, Category 4
-Storage: MIL-STD-810H, 514.8E Procedure 1, Category 24 Shock
-Operating: MIL-STD-810H, Method 516.8, Procedure I, functional shock=40g
-Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash hazard shock test=75g
Certifications CE FCC Class A EN 50155:2021
-Ambient temperature EN 50155, Class OT4
-Interruptions of voltage supply class S1
-Supply change over class C1, C2
-EMC EN 50121-1:2017, EN 50121-3-2:2016+A1:2019
-Environment EN 60068-2-1, EN 60068-2-2, EN 60068-2-30
-Shock and vibration IEC 61373 Class B
-Protective coating class PC1 (PC2, by request)
-EN 45545-2:2020+A1:2023
Add to Inquiry
Take a minute and tell us what you think!