MVS 5600

Intel® Core™ i7 Modular Fanless In-Vehicle Computer
  • Main Feature
  • Modular design for flexible I/O expansion
  • Three SIM cards + dual WWAN modules support
  • Wake on RTC/SMS via WWAN module
  • Built-in u-blox NEO-M8N module, optional Dead Reckoning support
  • Intel® Core™ dual core i7-6600U/i3-6100U
  • Voice communication via WWAN module
  • iButton for driver ID identification
  • Built-in CAN 2.0B. Optional OBDII function (SAE J1939)
Add to Inquiry
Datasheet(PDF)
CPU 6th generation Intel® Core™ dual core i7-6600U, 2.6GHz/i3-6100U, 2.3GHz
Memory 2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory
Storage 1 x 2.5" SATA 3.0 SSD/HDD (removable & hot swappable), RAID 0, 1 supported (optional lockable storage available) 1 x CFast (externally accessible)
Expansion 1 x full size Mini-PCIe socket (USB 2.0) 1 x full size Mini-PCIe socket (USB 2.0 + PCIe) 1 x half size Mini-PCIe socket (USB 2.0 + PCIe)
GPS and On Board Sensor 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou Optional modules with Dead Reckoning available Built-in G-sensor Built-in TPM
I/O Interface-Front 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health 1 x CFast socket with cover 1 x Reset button 2 x USB type A USB 3.0 port 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out 2 x externally accessible SIM card sockets (selectable) 2 x antenna holes for WWAN/WLAN/BT/GPS
I/O Interface-Rear 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED 1 x 9~36VDC input with ignition and 34W typical power consumption 2 x USB type A USB 3.0 port 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz 1 x HDMI port, resolution up to 2560 x 1600 @60Hz 2 x DB-9 RS-232 1 x DB-9 RS-232/422/485 (RI/5V/12V selectable) 1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button 1 x 16-pin terminal block connector
- 1 x CAN Bus 2.0B (on board)
- 1 x OBDII from optional VIOB-OBD-03 module (SAE J1939)
- 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module
- 1 x DB9 connector for optional DR signal input, 2 x MDO and iButton
- 8 x programmable GPIO
(4 x Digital inputs, w/ optional 3KV isolation protection)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~24VDC
(4 x Digital outputs, w/ optional 3KV isolation protection)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA
Power Management Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode Optional internal 1100mAh, Li-Polymer rechargeable battery
Operating System Windows 7/WES7/Windows 8/WES8/Windows 10/Linux kernel 3.X
Dimensions 260mm (W) x 196mm (D) x 66.5mm (H) (10.24" x 7.72" x 2.62") 2.1kg
Environment Operating temperatures: -30°C~60°C (w/ industrial SSD) with air flow Storage temperatures: -40°C~80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 1.2g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD) Vibration (SSD/HDD):
- Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
- Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Shock (SSD/HDD):
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval, FCC Class A, E13 Mark
Add to Inquiry
Take a minute and tell us what you think!