VMC 220

8" Rugged Vehicle Mount Computer with NXP i.MX 8M Quad Processor, Projected Capacitive Touch Screen and IP65
  • Main Feature
  • Built-in NXP i. MX 8M Quad low-power processor, up to 1.3 GHz
  • 8" TFT LCD monitor with projected capacitive touch screen
  • IPS LCD with wide viewing angle and resolution 1280 x 720
  • Touch panel covers thickness 3mm for IK08 protection
  • Sunlight readable capability: 1,000nits LCD brightness
  • CVBS input for analog camera x 4
  • Isolated CAN Bus 2.0 x 1
  • Wide range DC input from 9V ~ 60V DC in
  • Complete IP65 waterproof
  • Touchscreen is operable with various gloves (even with water spillage)
Add to Inquiry
Datasheet(PDF)
LCD Panel 8-inch TFT LCD panel with LED backlight 1280 x 720 pixels (HD) Brightness: 1000 cd/m² (typical) Viewing angle: 170° (H)/170°(V) Contrast ratio: 1000:1 (typical)
Touch Screen Projected capacitive Anti-glare coating surface Transmission rate: 80 ± 3%
CPU NXP i.MX 8M Quad processor with 1.3 GHz frequency Quad Arm® Cortex®-A53 core
Memory Onboard LPDDR4 2400MHz SDRAM 3GB
Storage 1 x eMMC 32GB (BOM optional 64GB) 1 x Micro SDXC Slot
Expansion 1 x M.2 2230 Key E socket (SDIO 3.0, PCIe 2.0, UART) 1 x M.2 3042/3050/3052 Key B socket (USB 3.0) for LTE/5G NR module with 1 x external Micro-SIM slot, with 1 x internal Micro-SIM slot
GNSS and Onboard Sensor 1 x Default u-blox NEO-M8N GNSS for GPS/Glonass/QZSS/Galileo/Beidou Optional M8U/M8L modules with dead reckoning available G Sensor and gyroscope
LAN 1-port LAN, 10/100/1000 Mbps
Security TPM 2.0: Infineon SLB9665TT2.0FW5.62 (BOM optional)
I/O Interface-Front Volume control keys (+/-) with LED Brightness control keys (+/-) with LED F1 ~ F4 programmable function keys with LED 1 x Shift key with LED Light sensor 4 x LED indicators (power, WWAN, WLAN, storage) 2 x Built-in 2W speakers 1 x Mic
I/O Interface-Lateral Left Side
- 1 x System reset button w/ cover
- 1 x MicroSD slot w/ cover
- 1 x Micro-SIM slot w/ cover Right Side
- 1 x Power button
- 1 x USB 2.0 type A connector w/ cover
- 1 x Mic-in (mono), 1 x Line-out (mono) w/ cover
I/O Interface-Rear 1 x Full RS232 (COM, w/ 5VDC, 12VDC) 1 x Power connector, M12 A-coded 5-pin 1 x 10/100/1000 Mbps LAN, M12 A-coded 8-pin 1 x M12 A-coded 8 pin for 2 x USB 2.0 1 x M12 (MULTI PORT1, A-coded 12-pin)
- 2 x GPI
- 2 x GPO
- 1 x Isolated CANBus 2.0B
- PWM (speed)+Direction+GND 1 x M12 (MULTI PORT2, A-coded 12-pin)
- 1 x RS232 (Tx, Rx)
- 1 x RS232 (Tx, Rx)/RS422/RS485
- 4 x Composite video input 2 x SMA connector for WWAN 3 x SMA connector for WLAN 1 x SMA connector for Bluetooth 1 x SMA connector for GNSS
Mechanical Cooling system: fanless Enclosure: plastic IK Rating: IK08 (housing and touch screen) Mounting: VESA 75 Ingress protection: complete IP65 Dimension: 250x179x67.5 mm Weight: 2.4kg
Power Management 9V ~ 60V DC in Reverse protection/over voltage protection/under voltage protection Ignition on/off control & programmable on/off delay timing Wake up by SMS, RTC and ignition
RFID Module (optional) 13.56-MHz RFID/contactless standard protocols Compatibles with all major global secured baseband ISO standards including ISO14443 Type A, MIFARE classic cards, and Smartlabel ISO15693
Environment v=Operating temperatures:Ambient with air -40°C to 70°C, ambient with air Storage temperatures: -40°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random)
- 2g@5~500 Hz (in operation) Vibration
- Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
- Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 Shock
- Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and
semi-trailers = 40g
- Crash hazard: MIL-STD-810G, Method 516.6, Procedure V,
ground equipment = 75g
Operating System Linux
Standards/Certifications CE/FCC class B/E13/IK08
Add to Inquiry
Take a minute and tell us what you think!