VTC 7252-7C4IP

Fanless 4-CH PoE IP65 Vehicle Computer with Intel® Core™ 9th CPU
  • Main Feature
  • Intel® Core™ 9th Gen, i7-9700TE, up to 3.8GHz, 8 Core
  • Full IP65 protection
  • 4 x Independent 10/100/1000 Mbps PoE 802.3af/at, total 60W
  • 2 x Internal 2.5” SSD, 2 x mSATA and 1 x CFast with RAID 0/1/5/10
  • 2 x Isolated CAN Bus 2.0B
  • Optional GNSS Dead Reckoning supported
  • Support 5G NR, Wi-Fi 6, V2X/DSRC, accelerator cards
  • CE/FCC/E-mark (E13) /MIL-STD-810G
Add to Inquiry
Datasheet(PDF)
CPU Intel® Core™ 9th Gen. i7-9700TE, up to 3.8 GHz, 35W, 8 Core
Chipset Intel® C246 platform controller hub
Memory 2-Channel 260-pin DDR4 SO-DMIM sockets up to 32GB/channel (64GB for two channels, non-ECC up to 2666 MHz), default 4GB + 4GB industrial grade memory
Video Output Chipset Intel® UHD Graphics 630 1 x VGA up to 1920 x 1200 @ 60Hz 1 x HDMI (4096 x 2160 @ 30Hz) (option)
Storage 2 x 2.5” SATA 3.0 internal SSD (tray: 9.5 mm height) 2 x mSATA 3.0 (occupied mini-PCIe socket) + 1 x CFast RAID 0/1/5/10 supported
Expansion 1 x M.2 3042/3052 Key B (USB 2.0, USB 3.2 Gen 2×1) for LTE/5G NR 2 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0 & SATA 3.0 [BIOS selection]) 1 x M.2 2230 Key E (USB 2.0, 2 x PCIe 3.0) for Wi-Fi. (BOM option) 1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0)
GNSS and On Board Sensor 1 x Default U-blox NEO-M8N GNSS module for GPS/Glonass/QZSS/Galileo/Beidou, optional modules with dead reckoning available TPM 2.0 by Infineon SLB9665TT2 1 x 3D accelerometer and 3D gyroscope
Power over Ethernet 4 x Independent LAN, 10/100/1000 Mbps Intel® I210-IT GbE, PoE 802.3af/at max. 60W 2 x LAN, 10/100/1000 Mbps (1 for I219 support iAMT and WOL)
I/O Interface-Front 1 x Reset button 16 x LED indicators (including 2 x programmable LED) 2 x USB 3.2 Gen 2 x 1 type A (5V/0.9A) with cover 2 x External Micro SIM slot with cover 1 x CFast with cover 1 x 6-pin for audio (1 x mic-in (mono) 1 x line-out (L + R)). (option) Additional 1 x mic-in (mono) and 1 x line-out (L + R) 1 x M12 8-pin for 2 x USB2.0 (5V/0.5A) 1 x M12 8-pin for full RS-232/422/485 2 x M12 8-pin for full RS-232 1 x M12 12-pin
- 2 x Isolated CAN Bus 2.0B
- 3 x DI, and 3 x DO 1 x M12 8-pin (internal reservation)
- 12VDC(2A) output
- RS-232 (TX & RX)
- Remote power button
- Reset button
- Sleeping mode button 1 x VGA (internal reservation) 1 x HDMI (internal reservation)
I/O Interface-Rear 1 x VGA 2 x M12 A-code LAN port, 10/100/1000 Mbps 4 x M12 A-code PoE port, 10/100/1000 Mbps 1 x M12 5-Pin DC Input with Ignition (9 ~ 36V) 7 x SMA antenna hole (WWAN(4)/WLAN(2)/GNSS(1))
Power Management & Software Support Power input 9~36VDC Cranking voltage: 6V~9V (< 30 seconds) Reverse protection, OCP & UVP Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software 1~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 10 Linux
Dimensions 256 x 256.4 x 66.5 (W x D x H) (mm)
Weight 4.5kg
Environment Operating temperatures
- -30°C~60°C (w/ industrial SSD) with air flow Storage temperatures: -40°C~80°C Relative humidity: 90% (non-condensing) Vibration (random)
- 2g @ 5~500 Hz (in operation, SSD) Vibration (SSD)
- Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
- Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Shock (SSD)
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=40g Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval FCC Class A E-Mark (E13) IP65 Compliance
Add to Inquiry
Take a minute and tell us what you think!