VTC 7260-5HCIoT/7HCIoT

Fanless AI-aided Vehicle Computer with Intel® Core™ 11th Gen CPU
  • Main Feature
  • Intel® 11th Gen Tiger Lake UP3, cost-efficient performance
  • Compact, rugged and fanless design
  • Rich I/Os, 4 x PoE+, GbE, 4 x USB 3.2/2.0 & 2 x RS232/422/485
  • 1 x 2.5” SSD, 1 x mSATA and 1 x NVMe SSD for data integrity
  • Up to 3 combinations of LTE/5G, Wi-Fi 5/6 for mobile router function
  • Triple display, VGA, HDMI and DP for multi video-out
  • 9~36V DC-IN with ignition control & OCP/OVP
  • Wide range operating temperature of -30°C~60°C (15W TDP&PoE)
  • Military standard of anti-vibration/shock for OHV applications
  • CE/FCC, UKCA, Emark Certified
Add to Inquiry
Datasheet(PDF)
CPU Intel® Core™ 11th Gen Tiger Lake UP3 Core i5-1145GRE, base frequency 1.5GHz/ 2.6GHz, 4c, 8 MB Intel® Smart Cache (VTC 7260-5HCIoT) TDP boot mode in BIOS setting: Nominal (15W) Core i7-1185GRE, base frequency 1.8GHz/ 2.8GHz, 4c, 12 MB Intel® Smart Cache (VTC 7260-7HCIoT) Graphics:
- Intel® Iris® Xe graphics, 1.3GHz
- Max resolution: 4096 x 2304@60Hz (HDMI)
- DirectX: 12.1, OpenGL: 4.6
Memory 2 x SO-DIMM, DDR4-3200MHz 4GB+4GB in default, 64GB in max. ECC (in-band ECC), dual- channel support
Storage 1 x 2.5” SSD (15mm height) 1 x mPCIe for mSATA (SATA 3.0) 1 x M.2 2242/2280 Key M NVMe SSD (PCIe 4.0 x4), Hailo AI card in option
Expansion slots 1 x mini-PCIe socket (PCIe 3.0/USB 3.2 + USB 2.0), 2 x micro SIMs supported 1 x M.2 3042/3052 Key B socket (USB 3.2), 2 x micro SIMs supported 1 x M.2 2230 Key E socket (PCIe 3.0 x2 & USB 2.0), Wi-Fi or Hailo AI card in option)
Display 1 x HDMI 2.0a/b, up to 3840 x 2160@60Hz 1 x VGA, up to 2560 x 1600@60Hz 1 x DP, 4096 x 2304@60Hz
PoE+ 4-port independent 2.5GbE, RJ45 connector
- IEEE 802.3 af/at, total 60W
- 9K byte jumbo frame
- PTP (IEEE 1588) support
- Controller: Intel® I225-IT
GbE 1-port independent GbE, RJ45 connector
- vPro (iAMT) support
- 9K byte jumbo frame
- PTP (IEEE 1588) support
- Wake-up function (WoL)
- Boot from PXE (UEFI)
USB 3 x USB 3.2 Gen1:
- Host type-A connector
- 5V@900mA each
- Up to 10Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed) 1 x USB 2.0, host type-A, 2 x USB 2.0 wafter-type reserved
Serial Port 2 x full RS232/422/485, selectable 2 x full RS232 wafer-type reserved
- RS232 working voltage, +-9V, baud rate up to 115.2kb/s
Security TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
Audio Line-out, unbalance stereo, left & right channel MIC-in, stereo Line-in reserved (wafer connector)
MEMS Sensor 3D accelerometer and 3D gyroscope Controller: ST LSM6DSLTR
DI/DO 4-bit input
- Source: 9~36VDC (12V@1.1mA/24V@2.2mA)
- External: 0~33VDC pull-high, high-level, 3.3-33 VDC; low-level, 0-2 VDC 4-bit output
- Source: 9~36VDC (nominal 35mA@24V):
- External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C) Source or external can be selected by DIP switch (default: source type)
CAN bus 1 x CAN 2.0A/ 2.0B IEC 61000-4-2 Electrostatic Discharge (ESD): ± 8KV/15KV (contact/air) 2.5KV isolated
GNSS U-blox NEO-M9N GNSS module for GPS/GLONESS/QZSS/Galileo/Beidou Optional DR (Dead Reckoning) function, NEO-M8U/M8L
Power Supply Nominal voltage: 9~36V Cranking voltage: 6V~9V (less than 20 sec) OCP & UVP (shut down once exceeding 37V) Ignition on/off control & programmable on/off delay timer Optional for remote power on/off control
I/O ports, Front-plate ŒŒ ATX power button, Reset button ŒŒ 9 x LED Indicators, 1 x VGA (DB15), 2 x COM (DB9, RS232/422/485), 1 x Multi-port (DB15, 4 x DI, 4 x DO, CAN, DR signal) , 1 x Ext. (DB15, reserved), 1 x PR-SMA for GNSS, 4 x PR-SMA for WLAN
I/O ports, Rear-plate 2 x Audio jack (Line-out & MIC-in) 3 x USB 3.2 type A, 1 x USB 2.0 type A 1 x HDMI, 1 x DP, 4 x PoE+ (2.5GbE, RJ45), 1 x GbE, 9~36VDC (3-pin Phoenix) 4 x SMA for WWAN, 4 x antenna holes reserved
I/O ports, side-plate 2 x SIM slots (SIM1-1, SIM2-1)
Dimensions & Weight 210.0mm x 173.0mm x 75.0mm (w/o mount brackets) 234.0mm x 173.0mm x 81.0mm (w/ mount brackets) Weight: 3.5kg
Environment Operating temperatures: -30°C~60°C (15W TDP & PoE) Storage temperatures: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibration in operating:
- MIL-STD-810H, 514.8C Procedure 6, Category 4
- IEC 60068-2-64: 2.0g@5~500Hz Vibration in storage:
- MIL-STD-810G, 514.6E Procedure 1, Category 24, 7.7g Shock:
- MIL-STD-810G, 516.6 Procedure I, trucks and semi-trailers=40g
- Crash hazard: Procedure V, ground equipment=75g
Certifications CE approval, FCC Class A, UKCA, E13 Certified
Operating System Linux (Ubuntu 18.04)
External Cable (option) DB15 multi-port adapter cable, 20cm
Add to Inquiry
Take a minute and tell us what you think!