CPU | Intel® Core™ processor dual core i5-4300U, 1.9GHz |
Memory | 2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB (default built-in 4GB) |
Storage | 2 x 2.5" SATA 3.0 SSD/HDD (externally accessible), RAID 0/1 supported (optional lockable storage available) 1 x CFast (externally accessible) |
Expansion | 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) 1 x Half size mini-PCIe socket (USB 2.0 + PCIe) |
Function | 1 x default U-blox UBX-G6010 GPS module (50-channel and GALIELO) or optional modules with Dead Reckoning or GLONASS support Built-in G-sensor |
Software Support | Windows 8, WES8 Window 7, WES7 Linux kernel 3.X |
I/O Interface-Front | 4 x LED for power, storage, WWAN, WLAN 2 x Externally accessible SATA 3.0 SSD/HDD tray, RAID 0/1 supported (optional lockable storage available) 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port 2 x Externally accessible SIM card socket (selectable) 1 x Phone jack 3.5mm for 1 x MIC-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x Externally accessible CFast card socket with cover 1 x Event button (trigger type) 1 x Reset button 3 x Antenna hole for WWAN/WLAN/BT |
I/O Interface-Rear |
1 x 9 ~ 36VDC input with ignition
1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port
2 x RJ45 10/100/1000 Fast Ethernet with LED
1 x Phone jack 3.5mm for 1 x MIC-in
1 x Phone jack 3.5mm for 1 x Line-out with 1.5W output each
1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz
1 x DP port. Resolution up to 2560 x 1600 @60Hz
2 x DB-9 RS232
1 x DB-9 RS232/422/485 (RI/5V/12V selectable)
1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO
1 x 16-pin terminal block
1 x CAN Bus 2.0B (on board)
1 x Optional OBDII module (ASE J1939 or J1708)
8 x Programmable GPIO (Digital Input) Input voltage (internal type): 5VDC TTL (default) Input voltage (source type): 3 ~ 12VDC (Digital Output) Digital output (sink type): 5VDC TTL (default), max. current: 20mA Digital output (source type): 3 ~ 24VDC, max. current: 150mA 1 x 12VDC output (2A), SM Bus 4 x Antenna hole for WWAN/WLAN/BT/GPS 1 x Fuse (15A) |
Power Management | Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode |
Dimensions | 260mm (W) x 206mm (D) x 79.5mm (H) (10.24" x 8.11" x 3.13") Weight: 2.5kg |
Environment |
Operating temperature: Ambient with air -30°C ~ 60°C
Storage temperature: -35°C ~ 85°C
Relative humidity: 10% ~ 90% (non-condensing)
Vibration (random): 1.5g@5 ~ 500Hz (in operation, HDD), 2g@5 ~ 500Hz (in operation, SSD)
Vibration (SSD/HDD): Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Shock (SSD/HDD): Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crashhazard shock test=75g |
Certifications | CE approval FCC Class B E13 Mark |