VMC 4511-K (EOL)

12.1" Rugged Vehicle Mount Computer with Intel® Core™ i, Touch Screen and IP65
  • Main Feature
  • 12.1" XGA TFT LCD monitor with 5-wire resistive
  • Compact and fanless design
  • Built-in Intel® Core™ i7-2610UE processor
  • Automatic/manual brightness control
  • On screen F1 ~ F10 programmable function keys
  • GPS, WLAN, and WWAN supported
  • CANBus 2.0B, and OBDII for car diagnostic
  • Robust design with Die-cast aluminum
  • All enclosure compliant with IP65
  • Wide range DC input from 9 ~ 36V
  • Sunlight readable solution with 1300 nits display
  • Military test standard for vibration and shock
  • Operating system: Windows & Linux
Add to Inquiry
General Cooling System: Fanless Enclosure: Aluminum die casting Mounting: Support VESA 75/100, Panel and stand mounting Three SMA Type antenna connectors of BT/Wi-Fi/WWAN Power Input: 9 ~ 36VDC input with Ignition Power Consumption: 26W typical Ingress Protection: IP65 Dimension: 340mm (W) x 262mm (H) x 75.1mm (D) (13.38" x 10.31" x 2.96") Weight: 3.5Kg, 7.72Lb
LCD Panel 12.1-inch TFT LCD panel with LED backlight 1024 x 768 pixels (XGA) Brightness: 1300 cd/m² (typical) Contrast ratio: 600:1 (typical)
Touch Screen Sensor 5-wire resistant touch Anti-glare coating surface Transmission rate: 81 ± 3%
CPU & Chipset Intel® Core™ i7-2610UE Intel® QM67 PCH chipset
Memory One 204-pin DDR3 1333MHz SO-DIMM slot (up to 4GB)
Expandable Storage 1 x CFast 1 x 2.5" SATA SSD bay
Expansion 2 x mini-PCIe socket (PCIe + USB) for WLAN/mSATA option 1 x mini-PCIe socket (USB) x 1 for WWAN option 2 x OBDII module with J1939 for option
I/O Interface-Front On screen display buttons x 5
Power on/off
Volume control (+/-)
Brightness control (+/-)
Light sensor 4 x LED indicators (Power on/off, Storage, Warning, Shift) F1 ~ F10 functions key 2 x Built-in 2W speakers
I/O Interface-Lateral 1 x CFast card slot System reset button USB 2.0 host type A connector
I/O Interface-Bottom 1 x GPS Antenna SMA connector(On housing) 1 x Mic-in, 1 x Line out 2 x USB 2.0/Ethernet (Host) 2 x LAN interface for 10/100/1000Base-T 1 x 9 ~ 36V, 3-pin (Power, Ignition, Ground), 10A 1 x Circle Type 22-pin Multi-I/O Connector
1 x COM (optional RS-232/422/485; default RS-232)
1 x COM (RS-232 Tx/Rx)
1 x COM RS-232 (with either 0, 5 or 12V @ 600mA on pin9)
1 x Circle Type 10-pin CONN
1 x OBDII module (option)
2 x DI and 2 x DO
1 x Circle Type 6-pin CONN for 5V/12VDC-out
Communication Module 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) 1 x WLAN and Bluetooth combo module for optional 1 x WWAN module for optional
Power Management Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable Support S4 suspend mode; wake on RTC/SMS
Environment Operating temperatures: Ambient with air -30°C to 60°C Storage temperatures: -30°C to 70°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 2g @5 ~ 500Hz
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g
Operating System WES2009 WES 7E Win7 Pro Embedded
Standards/Certifications CE approval, FCC Class B CE EN 60950-1 LVD
Add to Inquiry
Take a minute and tell us what you think!