VTC 1010

Intel® Atom™ E3827 Fanless In-Vehicle Computer
  • Main Feature
  • Intel® Atom™ processor E3827, 1.75GHz
  • Dual SIM cards + dual WWAN modules support
  • Wide operating temperature -30°C ~ 70°C
  • Built-in CAN 2.0B. Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
  • 4 x mini-PCIe socket rich expansion capability
  • Wake on RTC/SMS via WWAN module
  • Voice communication via WWAN module
  • Compliant with MIL-STD-810G
  • Built-in U-blox M8N GPS, optional dead reckoning support
Add to Inquiry
Datasheet(PDF)
CPU Intel® Atom™ processor E3827, Dual Core 1.75GHz
Memory 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 2GB
Storage 1 x 2.5" SATA 2.0 1 x External accessible SD card socket
Expansion 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0+ PCIe) 1 x Full size mini-PCIe socket (mSATA or PCIe) 1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Function 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning Built-in G-sensor, Gyroscope, and e-Compass sensors
I/O Interface-Front 8 x LED for power, system status, storage, WWAN, WLAN, GPS, LAN, GPIO 2 x External accessible SIM card socket (selectable) with cover 1 x Audio jack 3.5mm for WWAN voice communication, including 1 x Mic-in and 1 x Line-out 1 x External accessible SD card socket with cover 1 x Event button (trigger type) 1 x Reset button 1 x Type A USB 3.0 compliant host, supporting system boot up
I/O Interface-Rear 1 x 9 ~ 36VDC input with ignition and 11W typical power consumption 1 x Type A USB 2.0 compliant host, supporting system boot up 1 x RJ45 10/100/1000 Fast Ethernet with LED 1 x Phone jack 3.5mm for 1 x Mic-in (for WWAN voice communication) 1 x Phone jack 3.5mm for 1 x Line-out (for PC audio) 1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz 1 x DP port. Resolution up to 2560 x 1600 @60Hz 1 x DB-9 for RS-232 4 x Antenna hole for GPS/WWAN/WLAN/BT 1 x LHF 60-pin connector 1 x 6-pin power connector, 12VDC output (max: 1A) 1 x Type A female USB 2.0 compliant host, supporting system boot up 1 x DB-9 RS-232 1 x DB-9 RS-422/485 1 x DB-9 female 3 x DI and 3 x DO. On board CAN 2.0B signals
(Programmable Digital Input)
Input voltage (Internal Type): 5VDC TTL (default)
Input voltage (Source Type): 3 ~ 12VDC
(Programmable Digital Output)
Digital output (Sink Type): 5VDC TTL (default), max current: 20mA
Digital output (Source Type): 3 ~ 24VDC, max current: 250mA
1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939) 1 x DB-9 for optional GPS Dead Reckening module 4 x BNC connector Video-In for optional 4-channel video capture card 4 x Audio connector for 7.1 channel audio output (front, center/woofer, rear surround, side surround)
Power Management Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode
Operating System Windows 8 Professional, WES8 Windows 7, WES7 Tizen IVI Fedora Wind River® Intelligent Device Platfrom XT 2.0
Dimensions 180mm (W) x 180mm (D) x 50mm (H) (7.09" x 7.09" x 1.97") 1.7kg
Environment Operating temperatures:
-30°C to 70°C (w/ industrial SSD) with air flow
-20°C to 50°C (w/ commercial HDD) with air flow
Storage temperatures: -35°C to 85°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD) Vibration (SSD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier
US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum
integrity test
Shock (SSD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval FCC Class B E13 Mark
Add to Inquiry
Take a minute and tell us what you think!