NEX 885

Micro-ATX, Socket H3/LGA1150, 4th Generation Intel® Core™ i7/i5/i3, Q87 4DDR3, 2HDMI/DP/VGA, 1 x PCIe x16/3 x PCIe x4, 2 x GbE, 6 x SATA 3.0, 4 x COM, 10 x USB
  • Main Feature
  • Intel® Q87 support socket H3/LGA1150 for 4th generation Intel® Core™ i7/i5/i3 processors
  • 4 x DDR3 DIMM socket up to 32 GB
  • Support 2 x HDMI/DisplayPort/VGA up to three independent displays
  • 2 x Intel® GbE, 6 x SATA 3.0, 3 x USB 3.0/2.0, 4 x USB 2.0/4 x COM, 8 x GPIO
  • 1 x PCIe x16, 3 x PCIe x4
  • Support AT/ATX mode by ATX power input
Add to Inquiry
Datasheet(PDF)
CPU Support Socket H3/LGA1150, 4th generation Intel® Core™ i7/i5/i3 processors
Main Memory 4 x 240-pin dual channel long DIMMs support DDR3 1066/1333/1600MHz up to 32GB system memory
Chipset Intel® Q87 platform controller Hub
BIOS AMI BIOS UEFI Plug and play support
On-board LAN ETH 0: Intel® I217LM PHY for AMT 9.0 ETH 1: Intel® I211 PCI express Gigabit Ethernet Both ETH0 and ETH1 support boot from LAN (PXE) when +5Vsb power available 2 x GbE RJ45 with LEDs
Display 4th generation Intel® Core™ socket H3/LGA1150 processors Integrated gen. 7.5 HD Graphics 2 x HDMI 1 x DisplayPort 1 x VGA
Expansion 1 x PCIe x16 (gen. 3.0) 3 x PCIe x4
Edge I/O Interfaces 1 x Combo for PS2 KB/MS 1 x Stack DB9 for COM1, and 1 x stack DB15 for VGA 1 x HDMI, 1 x stack combo of 2nd HDMI and 1 x DisplayPort 1 x RJ45 (ETH 0) with dual stack USB 3.0 (blue)/USB 2.0 connectors 1 x RJ45 (ETH 1) with dual stack USB 2.0 (black) connectors 1 x Stack Line-In/Line-out/Mic-in phone jack
I/O Interface USB3.0: 3 ports (2 x USB3.0 on edge I/O, 1 x internal box-header) USB2.0: 7 ports (4 x USB2.0 on edge I/O, 3 x internal box-header) Serial: 4 ports (default COM1/RS-232, pre-selected 1 x RS232/422/485, 2 x RS-232 by internal SATA HDD: 6 ports, SATA 3.0, support software RAID 0/1/5/10 and Intel® Matrix Storage GPIO: supports 4 x GPI and 4 x GPO with TTL level (0- 5V), 2 x 6-pin header, 2.54mm
Interface One onboard buzzer One 4-pin fan connector for CPU, Two 3-pin fan connector x 2 (for system) One 2 x 4/2.54mm pin header for: power LED/storage LED/reset/power on-off One 2 x 4/2.54mm pin header for : Mic-in/Line-out Front panel I/O: HDD LED (1-3 pin); power LED (2-4 pin) Reset (5-7 pin); power button (6-8 pin) Onboard pin header for IrDA Tx/Rx (option) On-chip RTC with back-up battery/CR2032 holder onboard
System Monitor Derived from super IO ITE IT8785E to support system monitor Monitoring of voltages, 2 temperatures and 3 fans speed 4 voltage for 3.3V, 5V, 12V, Vcore 2 temperatures (CPU, one external temperature sensor) 3 fans speed Watchdog timeout can be programmable by Software from 1 second to 255 seconds/minutes
Power Input Support AT/ATX mode
Standard ATX 24-pin connector for +12V/+5V/+3.3V/+5Vsb/-12V ATX 8-pin connector for +12V power connector
Dimensions Micro-ATX/dimension: L x W, 244mm x 244mm; 9.6" x 9.6"
Environment Board level operating temperatures: -15°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: operating 10% to 90%, (non-condensing)
Certifications Meet CE FCC Class A
Add to Inquiry
Take a minute and tell us what you think!