PEAK 888VL2

PICMG 1.3 Full-size SBC with Intel® Q170/H110 Support 6th Generation Intel® Core™ i7/i5/i3 Processors
  • Main Feature
  • Support 6th generation Intel® Core™ i7/i5/i3 processor
  • Support Intel® Q170/ H110 PCH chipset PICMG 1.3 specification
  • Support Dual channel DDR4 with Non-ECC DIMMs 1866/2133MHz up to 32GB
  • Support PCIe 3.0 SATA 3.0 W/RAID 0,1,5,10, M.2 NVMe
  • Support Display for VGA, DVI/HDMI, DP
  • Support Intel® AMT 11 & TPM 1.2/ 2.0(optional)
Add to Inquiry
Datasheet(PDF)
CPU Support 6th generation Intel® Core™ i7/i5/i3 processor (65W/ 35W) TDPs, Socket LGA1151
Main Memory 2 x DIMM, support Dual channel DDR4 NON-ECC DIMM 1866/2133 MT/S (Maximum32GB)
Platform Control Hub Intel® H110 Express Chipset PCH Intel® Q170 Express Chipset PCH
BIOS AMI system BIOS 16MBit SPI depended on AMT function Dual BIOS for Four PCIex1 and One PCIex4
Display The Processor Graphics contains a refresh of the ninth generation graphics Intel® HD Graphics 530 Support independent triple display. VGA: Resolution up to 1920*1200 pixels @60MHz DVI : Resolution up to 1920*1200 pixels @60MHz HDMI: Resolution up to 4096*2304 pixels @60MHz DP: Resolution up to 4096*2304 pixels @60MHz
* Supporting 4K display required two DDR channels of same size
Audio High definition audio interface (Compatible with NEXCOM audio daughter board PN: 10E000HDA00X0 EBK-HAD)
On-board LAN 1 x Intel® WG1219LM GbE PHY (PEAK 888Q support Intel® AMT 11) 1 x Intel® I211 Gigabit Ethernet Controller RJ45 with LED connecter x 2 Support Boot from LAN (PXE) Support Wake on LAN
I/O Interface 1 x PCI Express x16 and 1 PCI Express x4 to backplane 4 x PCI to backplane PEAk 888VL2-Q
- 5 x SATA 3.0 port (2 x SATA 3.0 to BP through BIOS setting)
- 1 x M.2 2280/ 22110 M Key (NVMe Gen 3 PCIex4)
- Support RAID 0/1/5/10
- SIO: ITE8786 , COM 1,3,4 Support RS232 , COM2 support RS232/422/485 can be selected RI/5V/12V through jumper PS2 KB/MS *1 JST connector
- Parallel Port: 26-pin box header x 1
- 6 Ports USB2.0 and 4 ports USB3.0
2 ports USB2.0, 2 ports USB3.0
1 port USB2.0 Type A (PEAK 888Q only)
4 ports USB 2.0 through backplane
2 ports USB 3.0 through I/O bracket
- 2*10 pin header to support TPM module
- 2 x Smart FAN connector (for CPU, system)
- On-board buzzer
- Watchdog time out can be programmable by software from 1 second to 255 seconds
Power Requirements Power source from backplane through golden finger and AUX +12V Support ATX/AT function by jumper setting BIOS default is (ATX MODE)
Dimensions 338.58mm x 126.39mm, 8 layers (single side)
Environment Board level operating temperatures: -20°C to 60°C Storage temperatures: -20°C to 85°C Relative humidity:
0% to 90% (operating, non-condensing)
0% to 95% (non-operating, non-condensing)
Certifications CE approval FCC Class A CB/CCC certification
Add to Inquiry
Take a minute and tell us what you think!