nROK 6232-WIC4S

Powered by Intel Atom® x7433RE Processor Fanless 4-CH PoE Rolling Stock Computer
  • Main Feature
  • Intel Atom® x7433RE processor
  • 4 x PoE (802.3 bt/af/at, up to 90W total)
  • Built-in u-blox-M9N GPS
  • Built-in CAN FD
  • EN 50155, class OT4 conformity
  • 3 x Expansion slot
  • 1 x eMMC to run OS
  • Two video outputs, one VGA, and one HDMI®
Add to Inquiry
Datasheet(PDF)
Processor Intel Atom® x7433RE processor (embedded)
Memory 1 x DDR5 4800 SO-DIMM, up to 32GB, default 8GB
Display Interface 1 x HDMI® 2.0, up to 4096x2160@60Hz 1 x VGA, up to 1920x1200@60Hz
Storage 1 x 2.5” SATA 3.0 HDD/SSD tray, removable, 15mm,
1 x M.2 Key B 2242 SATA 1 x 64GB eMMC default for OS
Expansion Slot 1 x Mini PCIe slot (PCIe 3.0, USB 2.0), BOM optional M.2 Key B 3052
(USB 3.2, USB 2.0)
- Support an LTE/5G NR module with 2 x external SIM 1 x M.2 Key B 3042/3052 (USB 3.2, USB 2.0)
- Support an LTE/5G module 1 x M.2 Key E 2230 (PCIe 3.0, USB 2.0), BOM optional Mini PCIe
(PCIe 3.0, USB 2.0)
- Support Hailo module
Sensor 1 x u-blox NEO-M9N GNSS for GPS/GLONASS/QZSS/Galileo/Beidou 3D accelerometer and 3D gyroscope
System Capabilities TPM 2.0: Infineon SLB 9672VU2.0
I/O Interface Front 10 x LED indicator (including 1 x programmable LED) 4 x Externally accessible nano-SIM card slot with cover 1 x 2.5” removable SSD tray, removable, 15mm 1 x Reset button 1 x Power button 2 x USB 3.2 Gen 2, Type-A 1 x HDMI® 2.0 1 x M8 A-coded connector for mic in, 1 x Line out, 1 x Line in 5 x SMA antenna 1 x M12 K-coded connector for power input with ignition
- DC 24V~110V w/ isolation
I/O Interface Rear 1 x 2.5GbE M12 X-coded connector, Intel® I226-IT 4 x 2.5GbE M12 X-coded PoE connector, Intel® I226-IT (2 x 802.3 bt + 2 x 802.3 af/at), up to 90W total (PoE++1, PoE++2, PoE+3, PoE+4) 1 x VGA, up to 1920x1200@60Hz 2 x COM port (DB9), supports RS-232/422/485 4 x SMA antenna 1 x M12 A-coded connector for 2 x USB 2.0 1 x MULTI1 port (DB15)
-4 x DI with isolation
-4 x DO with isolation
-1 x GNSS Speed/Direction
-Vin, GND for GPIO 1 x MULTI2 port (DB15)
-1 x RS-422/485
-1 x RS-232 (Tx/Rx)
-1 x CAN FD
-1 x DC 12V, 2A output (Vout, GND)
Power Management DC 24V~110V power input w/ isolation Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Support S3/S4 suspend mode 10~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 10, 64bit Windows 11 Linux 4.x
Mechanical Dimensions: 260mm (W) x 196mm (D) x 66.5mm (H) Weight: 3.4kg
Environment Operating temperature
- EN 50155, class OT4 (-40°C~70°C), 85°C for 10 minutes
(w/ industrial SSD) with air flow Relative humidity: 10%~90% (non-condensing) Vibration (random)
- 2g@5Hz~500Hz (in operation, SSD) Vibration (SSD)
- Operating: MIL-STD-810H, Method 514.8C, Category 4,
common carrier US highway truck vibration exposure
- Storage: MIL-STD-810H, Method 514.8E, Category 24,
minimum integrity test Shock (SSD)
- Operating: MIL-STD-810H, Method 516.8, Procedure I,
functional shock=40g
- Non-operating: MIL-STD-810H, Method 516.8, Procedure V,
crash hazard shock test=75g
Certifications CE, FCC Class A EN 50155:2021
-Ambient temperature EN 50155, Class OT4 (-40~70°C), 85°C for 10 minutes
-Interruptions of voltage supply class S1
-Supply change over class C1, C2
-EMC EN 50121-1:2017, EN 50121-3-2:2016+A1:2019
-Environment EN 60068-2-1, EN 60068-2-2, EN 60068-2-30
-Shock and vibration IEC 61373 Class B
-Protective coating class PC1 (PC2, by request) EN 45545-2:2020+A1:2023
Add to Inquiry
Take a minute and tell us what you think!