| Processor | Intel Atom® x7213RE processor, TDP 9W |
| Memory | 1 x DDR5 4800 SO-DIMM, up to 16GB, default 8GB |
| Storage | 1 x mSATA (occupies one Mini PCIe slot) 1 x 2.5” SATA 3.0 SSD (9.5mm) |
| Expansion Slot |
1 x Mini PCIe slot (USB 2.0, PCIe 3.0/SATA 3.0), with BIOS-selectable USB 2.0 only for LTE with 2 x external nano-SIM
1 x M.2 Key B 3042/3050/3052 (USB 2.0, USB 3.2 Gen 2) -Support LTE/5G NR module with 2 x external nano-SIM 1 x M.2 Key E 2230 (USB 2.0, PCIe 3.0) for Wi-Fi |
| Sensor |
1 x u-blox NEO-M9N onboard - Support GPS+QZSS/GLONASS/Galileo/BeiDou Built-in 3D accelerometer and 3D gyroscope |
| System Capabilities | TPM 2.0: Infineon SLB 9672VU2.0 |
| I/O Interface Front |
1 x Power button with LED
1 x Reset button
8 x LED for WWAN, Wi-Fi, storage, LAN, and PoE
4 x nano-SIM slot with cover
nROK 1040: -3 x 1GbE M12 X-coded connector nROK 1040-AC2: -1 x 2.5GbE M12 X-coded connector -2 x 2.5GbE M12 X-coded PoE connector, 802.3af/at, up to total 30W 1 x DB9 audio connector for 1 x Mic in, 1 x Line out 1 x USB 3.2, 1 x USB 2.0 1 x SMA connector for GNSS 2 x RP-SMA connector hole for WLAN 2 x SMA connector hole for WWAN |
| I/O Interface Rear |
1 x 5-pin M12 A-coded DC 24V power input (w/ ignition,
non-isolation)
1 x VGA, up to 1920x1200@60Hz
1 x HDMI® 1.4b, up to 3840x2160@30Hz
1 x COM port (DB15 female, COM1/2) -1 x Full RS-232/422/485 -1 x RS-232 Tx/Rx 1 x COM port (DB15 female, COM3/4) -1 x Full RS-232/422/485 -1 x RS-232 Tx/Rx 1 x COM port (DB15 female, MULTI) -1 x CAN FD (w/ isolation) -4 x DI, 4 x DO 1 x 8-pin (4x2) connector -DC 12V/2A output -Reset button -Power button -GPS 1PPS -GPS DIR -GPS ODO 4 x SMA connector hole for WWAN |
| Operating System | Windows 11 Windows 10, 64bit Linux 4.x |
| Mechanical |
Dimensions: 185mm (W) x 125mm (D) x 55mm (H)
Weight -nROK 1040: 1.36kg -nROK 1040-AC2: 1.39kg |
| Environment |
Temperature: -Operating temperature: -40°C~70°C, 85°C for 10 minutes (w/ 9W TDP CPU, 30W PoE, 8GB memory, industrial SSD) with air flow -Storage temperature: -40°C~85°C Humidity: IEC 60068-2-78 (Damp heat steady state test, 40°C/95%/48Hrs) Vibration: -IEC 60068-2-64, 2G -Operating: MIL-STD-810H, 514.8C Procedure 1, Category 4 -Storage: MIL-STD-810H, 514.8E Procedure 1, Category 24 Shock -MIL-STD-810H, 516.8 Procedure I, trucks and semi-trailers=40g -Crash hazard: Procedure V, ground equipment=75g |
| Certifications |
CE, UKCA, FCC Class A
EN 50155:2021 -Ambient temperature: EN 50155, Class OT4 -Interruptions of voltage supply Class S1 -Supply change over Class C1 -EMC EN 50121-1:2017, EN 50121-3-2:2016+A1:2019 -Environment EN 60068-2-1, EN 60068-2-2, EN 60068-2-30 -Shock and vibration IEC 61373 Class B -Protective coating class PC1 (PC2 by request) EN 45545-2:2020+A1:2023 |