ATC 3561-NX4C

NVIDIA® Jetson Orin™ NX Solution
Accelerated Edge AI Computer
  • Main Feature
  • Built-in NVIDIA® Jetson Orin™ NX 8GB/16GB SOM, up to 157 INT8 Sparse TOPS AI performance in Super Mode
  • The rugged, palm size, and fanless/fan kit design
  • 4 x GbE PoE+ port for IP CAM/LiDAR sensors
  • HEVC/H.265 hardware decode, supports up to 18 x 1080p30
  • Wide range operating temperature of -25°C~60°C (fan kit, in Super Mode)
  • Ultra-speed PCIe 4.0 x4 NVMe SSD for data integrity
  • Expansible for GNSS, LTE/5G NR & Wi-Fi 5/6
  • DC 9V~36V input with ignition control & OCP/OVP
  • NEXCOM Acceleration Linux (NAL) OS w/ JetPack 6.2 integrated
  • Military standard of MIL-STD-810H for anti-
Add to Inquiry
Datasheet(PDF)
NVIDIA® Jetson Orin™ NX SOM Jetson Orin NX™ 8GB
- CPU: 6-core Arm® Cortex®-A78AE v8.2 64-bit 1.5MB L2 + 4MB L3
- GPU: 1024-core NVIDIA Ampere architecture with 32 Tensor Cores
- Memory: 8GB 128-bit LPDDR5 102.4GB/s
- AI performance: 117 INT8 Sparse TOPS Jetson Orin NX™ 16GB
- CPU: 8-core Arm® Cortex®-A78AE v8.2 64-bit CPU 2MB L2 + 4MB L3
- GPU: 1024-core NVIDIA Ampere architecture with 32 Tensor Cores
- Memory: 16GB 128-bit LPDDR5 102GB/s, 3200MHz in frequency
- AI performance: 157 INT8 Sparse TOPS OpenGL 4.6, OpenGL ES 3.2, CUDA® 11.4, and Vulkan 1.1 260-pin SO-DIMM form factor compatible with Xavier NX/TX2 NVIDIA® JetPack 6.2
Storage/Boot Disk 1 x M.2 Key M 2242 PCIe 4.0 x4 NVMe SSD, 128GB in default
Expansion 1 x M.2 Key E 2230 (PCIe 4.0 + USB 2.0) 1 x M.2 Key B 3042/3052 (USB 3.2/2.0) with 2 x nano-SIM slot
Display 1 x HDMI® 2.0a/b, up to 3840x2160@60Hz
G-Sensor 3D accelerometer and 3D gyroscope, ST LSM6DSLTR
Remote Power Trigger ATX power button, wafer reserved
PoE+ 4 x 1GbE RJ45 port
- 9K byte Jumbo frame, PTP (IEEE 1588) supported
- Switching: Realtek RTL8367RBI-VH-CG-I
- IEEE 802.11af/at PoE (30W power budget)
- PSE on/off & Watt monitoring
USB 2 x USB 3.2, Type-A
- 5V@900mA each
- up to 5Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed) 1 x OTG Micro-USB (w/ a door) 1 x USB 2.0, wafer reserved
DI/DO 4-Bit input, non-isolation
- Source: DC 9V~36V (12V@0.6mA/24V@1.2mA)
- External: DC 0V~33V pull-high, high-level, DC 3.3V~33V; low-level, DC 0V~2V 4-Bit output, non-isolation
- Source: DC 9V~36V (nominal 35mA@24V)
- External: DC 5V~27V pull-high, sink current w/ 220mA for each bit, 500mA max (@25C) Source or external can be selected by software (default: source type) Connector: Multi-port (DB15)
Serial Port 1 x COM Multi-port (DB15), supports RS-232 (Tx, Rx)
- RS-232 working voltage ± 9V, baud rate up to 115.2kb/s 1 x Console port (Tx, Rx), wafer reserved
CAN bus 1 x CAN FD, compatible with CAN 2.0A/2.0B
- IEC 61000-4-2 Electrostatic Discharge (ESD): ± 4KV/8KV (contact/air, whole system)
- Up to 5Mb/s in data transmit
- 2.5KV isolated
- Connector: Multi-port (DB15)
GPS Onboard u-blox NEO-M9N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou Optional NEO-M9V w/ DR (dead reckoning) function
Power Supply Nominal voltage: DC 9V~36V Cranking voltage: DC 6V~9V (less than 20sec) OCP & UVP (shut down once exceeding 37V) Ignition on/off control & programmable on/off delay timer Opional for remote power on/off control
I/O Ports, Front-Plate 6 x LED indicator 1 x Reset button 2 x nano-SIM slot, 1 x OTG 1 x HDMI® 2 x USB 3.2 1 x Multi-port (DB15) 1 x Antenna hole for GNSS (RP-SMA ant.)
I/O Ports, Rear-Plate DC 9V~36V input, terminal block 4 x 1GbE RJ45 PoE port
I/O Ports, Side-Plate 4 x Antenna hole for LTE/5G module (SMA ant.) 2 x Antenna hole for Wi-Fi 5/6 module (PR-SMA ant.)
Dimension & Weight Dimensions: 179.4mm (W) x 119mm (D) x 70.1mm (H) (w/ mount bracket,w/ fan kit) Weight: 1.58kg (w/ fan kit)
Environment Operating temperature: -25°C~60°C (w/ fan kit in Super Mode)
- -25°C~60°C (w/ fan kit in Super Mode)
- -25°C~55°C (fanless in Normal Mode) Storage temperature: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibration in operating
- MIL-STD-810H, 514.8C, Procedure 6, Category 4
- IEC 60068-2-64: 2.0g@5Hz~500Hz
- MIL-STD-810G, 514.6E, Procedure 1, Category 24, 7.7g approx. Shock
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval, FCC Class A, UKCA, E-mark
Operating System NEXCOM Acceleration Linux (NAL) w/ Jetpack 6.2 integrated
- NEXCOM custom functions (GNSS, 5G NR, 6-axis sensor, MCU control)
- V4L2
- Ubuntu 22.04@Kernel 5.15
External Cable Multi-port adapter cable, 20cm
Add to Inquiry
Take a minute and tell us what you think!