Intel® Core™ i7/ i5/ i3/ Pentium® LGA1156 with 2 x PCI Express Gigabit LAN/ 6 x SATA/ 8 x USB 2.0
  • Main Feature
  • Onboard XGI Z11 graphic for Intel® Core™ i7 processors
  • Support Intel® LGA1156, Core™ i7/ i5/ i3/ Pentium®
  • 1 x 82574 PCI Express Gigabit Ethernet
  • 1 x 82578DM Gigabit Ethernet
  • 6 x SATA, 8 x USB2.0, 2 x COM, 1 x Parallel
  • Support Non-ECC Dual Channel DIMM-DDR3 1066/1333 MHz up to 8GB
  • Intel® AMT 6.0
Add to Inquiry
CPU Support Intel® LGA1156, Core™ i7/ i5/ i3/ Pentium® Intel® Quad Core™ i5/ i7
Main Memory 2 x 240-pin DIMM, for up to 8GB dual channel Non-ECC DDR3 1066/1333 SDRAM
Chipset Intel® Q57 Express Chipset PCH
BIOS AMI BIOS Plug and play support Advanced power management and advanced configuration & power interface support
On-board LAN 1 x Intel® 82578DM PHY for AMT 6.0 1 x Intel® 82574L PCI Express Gigabit Ethernet Support boot from LAN (PXE) 2 x RJ45 with LED
Display Integrated graphic engine by XGI Volari Z11 GPU with DDR2 SDRAM through PCIe 1 x Interface Analog VGA Interface: 2x8 2.0mm box header, 230MHz pixel clock support CRT display up to 1600x1200@70Hz 16M colors
I/O Interfaces USB 2.0: 8 ports (2 on board, 4 to backplane), 2 ports through I/O Bracket Serial port: 2 port, with 2x5pin headers (COM 1 and COM 2) SATA HDD: 6 ports, Support RAID 0/1/5/10 and Intel® Matrix Storage Technology (Intel® MST) Parallel port: 1 x 26-pin connector IrDA: 1 x 5-pin header GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface On-board buzzer x 1 Power LED/ Power On/ Reset/ SMBUS: 2 x 8 pin header 1 x 4-pin fan connector (for CPU); 1 x 3-pin fan connectors (for System) IPMB interface through PICMG 1.3 Golden-finger I/O On SBC Bracket 1 x VGA DB-15 connector 2 x RJ45 Gigabit Ethernet LAN port 2 x USB 2.0 Ports
Watchdog Timer 1-minute increments from 1 to 255 minutes 1-second increments from 1 to 255 seconds On-chip RTC with battery backup 1 x External Li-lon battery
System Monitor 6 Voltages (+3.3V, +5V, +12V, Vcore) memory, VTT 3 Temperatures (For CPU and System) 2 FAN speed monitors (1 for CPU and 2 for System FAN)
Dimensions PICMG 1.3 SHB Dimension: 338.58mm (L) x 126.39mm (W) (13.3’’ x 4.9’’)
Power Input Power source from backplane through golden finger and AUX +12V support ATX/AT power supplies +12V/+5V/+3.3V/+5Vsb
Environment Board level operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: 10% to 90%, (Non-condensing)
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!