NEX 980

ATX, Socket LGA1155 3rd/ 2nd Generation Intel® Core™ i7/ i5/ i3, Q77 4DDR3, DP/ HDMI/ VGA, PCIe x16/ PCIe x4/ 4PCI/ PCIe x1/ mPCIe, mSATA/ CFast
  • Main Feature
  • Support Socket LGA 1155 for 3rd/ 2nd Generation Intel® Core™ i7/ i5/ i3, Celeron Processors
  • 4x DDR3 DIMM Socket up to 32 GB
  • Support DisplayPort/ HDMI/ VGA multiple displays
  • 2 x Intel® GbE, 4 x SATA3.0/ 2.0, mSATA, CFast, 12 x USB3.0/ 2.0, 6 x COM, 8 x GPIO
  • 1 x PCIe x16, 1 x PCIe x4, 1 x PCIe x1, 1 x mPCIe, 4 x PCI (v2.3)
  • Support AT/ ATX mode by ATX Power Input
Add to Inquiry
CPU Support Socket LGA1155, 3rd. or 2nd. Generation Intel® Core™ i7/ i5/ i3, Celeron processors
Main Memory 4 x 240-pin dual channel long DIMMs support DDR3 1066/ 1333/ 1600/ 2133Mhz up to 32GB system memory
Chipset Intel® Q77 Platform Controller Hub
BIOS AMI BIOS UEFI Plug and play support
On-board LAN 1 x Intel® 82579V/ LM PHY for AMT 8.0 1 x Intel® 82583V PCI Express Gigabit Ethernet Support boot from LAN (PXE) 2 x RJ45 with LEDs
Display 3rd or 2nd Generation Intel® Core™ socket LGA1155 processors Integrated HD graphics 1 x HDMI 1 x DisplayPort 1 x VGA
Expansion 1 x PCIe x16 (Gen. 3.0/ 2.0 by CPU) 1 x PCIe x4 1 x PCIe x1 4 x PCI (v2.3)
Edge I/O Interfaces 1 x Combo for PS2 KB/MS 2 x stack DB9 for COM1 & COM2 1 x DisplayPort 1 x HDMI with dual stack USB 2.0 (black) 1 x VGA 2 x RJ45 with dual stack USB 3.0 (blue) and dual stack USB 2.0 (black) connectors Line-In/ Line-Out/ MIC phone jack
I/O Interface USB 3.0: 4 ports ( 2 x USB3.0 on edge I/O, 2 x internal box-header) USB 2.0: 8 ports ( 4 x USB2.0 on edge I/O, 4 x internal box-header) Serial: 6 ports (default 2 x RS-232 pre-selected RS422/ 485 in BIOS, 4 x RS-232 by internal pins-header) SATA HDD: 4 ports, port 0, 1 support SATA 3.0, port 2, 3 support SATA 2.0, dual SATA Power by 2 x 4xpins Support Software RAID 0/ 1/ 5/ 10 and Intel® Matrix Storage GPIO: Supports 4xGPI and 4 x GPO with TTL level (5V or 12V by Jumper)
Interface On-board buzzer x 1 9 x pins system header for Power LED/ Power On/ Reset/ HDD LED 1 x 4-pin fan connector (for CPU); 1x 3-pin fan connectors (for CPU or System) On-chip RTC with battery/ CR2032 backup holder onboard
System Monitor 4 Voltages (+3.3V, +5V, +12V, Vcore) 2 Temperatures (For CPU and System) 3 FAN speed monitors (1 for CPU and 2 for Chassis Fan/System)
Power Input Support AT/ ATX mode Standard ATX 24-pin connector for +12V/ +5V/ +3.3V/ +5Vsb/ -12V ATX 4-pin connector for +12V
Dimensions Micro ATX Dimension: Lx W, 305mm x 244mm; 12”x 9.6”
Environment Board level operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: 10% to 90%, (Non-condensing)
Certifications Meet CE Meet FCC
Add to Inquiry
Take a minute and tell us what you think!