VMC 1110

7" All-In-One Vehicle Computer with Touch Screen
  • Main Feature
  • 7" 1024 x 600 TFT LCD monitor with resistive touch screen
  • LCD Brightness 1000 cd/m² (typical)
  • Built-in Intel Atom® dual core x7211RE 1.0GHz
  • Compact and fanless design
  • On screen programmable F1 ~ F5 function keys
  • Support GNSS/WWAN tracker function for car-safety
  • Built-in GNSS (Optional: Dead Reckoning Support)
  • GNSS/WLAN/WWAN for wireless communication
  • CAN FD for car diagnostic
  • Wide range DC input from 9 ~ 36V
  • Military standard for vibration and shock
  • CE/FCC/EMark
Add to Inquiry
Datasheet(PDF)
LCD Panel 7-inch TFT LCD panel with LED backlight 1024 x 600 pixels Brightness: 1000 cd/m² (typical) Viewing angle: 170° (H)/170°(V) Contrast ratio: 1000:1 (typical)
Touch Screen Sensor 4-Wire resistant touch Anti-glare coating surface Transmission rate: 78 ± 3%
CPU & Chipset Intel Atom® dual core x7211RE Processor, 1.0GHz
Memory 1 x DDR5 4800MHz 262-pin SO-DIMM, up to 32GB, 8GB default
Video Output 1 x HDMI 2.0a/b, up to 3840 x 2160@60Hz
Storage 1 x eMMC 128GB 1 x microSD card slot, SDXC v3.01 2 x M.2 Key B 2242 socket (M.2 socket occupied)
Expansion 1 x M.2 Key B 3042/3050/3052 socket (USB 2.0, USB 3.2 Gen 2, SATA
3.0) for LTE/5G NR module with 1 x external dual nano-SIMs 1 x M.2 Key E 2230 socket (USB 2.0, PCIe 3.0 x2), BOM optional M.2 Key E 2230 socket (USB 2.0, PCIe 3.0, PCIe 3.0) 1 x M.2 Key B 2242 socket (USB 2.0, PCIe 3.0/SATA 3.0 (auto detect)
GNSS and Onboard Sensor 1 x Default u-blox NEO-M9N GNSS for GPS/Glonass/QZSS/Galileo/Beidou Optional M9V modules with dead reckoning available G Sensor and gyroscope
LAN 1 x 10/100/1000/2500Mbps M12 X-coded LAN Port, Intel® I226 GbE (support WOL)
Security TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
I/O Interface-Front F1 ~ F5 functions key Light sensor Internal Mic-in 2 x Built-in 2W speaker 3 x LED indicators (power mode, storage, and WWAN status)
I/O Interface-Lateral Left Side
- 1 x Power button
- 1 x System reset button
- Volume up/down or brightness up/down Right Side
- 1 x microSD card socket
- 1 x Slot for dual nano-SIMs
- 1 x USB 3.2 Gen 2 Type-A connector
- 1 x Mic in, Line out
I/O Interface-Rear 1 x 5-Pin circular connector for power/ignition input 1 x M12 X-coded LAN port 1 x DB15 (COM)
- Full RS-232/RS-422/RS-485
- RS-232
- RS-485 1 x HDMI output 1 x DB15 (Multi Port)
- 1 x USB 2.0
- 3 x GPI
- 2 x GPO
- 1 x Isolated CAN FD
- PWM (speed) + Direction + GND 2 x SMA connector for WWAN 2 x SMA connector hole for WWAN 2 x RP-SMA connector for WLAN 1 x SMA connector for GNSS
Power Management Power input 9~36VDC Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable Support S3 and S4 suspend mode
Mechanical Cooling system: fanless Enclosure: plastic with aluminum die casting heatsink Mounting: VESA 75, stand mounting Ingress protection: front panel IP54
Operating System Windows 11/Windows 10/Linux
Dimensions 213.0mm (W) x 145.0mm (D) x 50.0 (H)
Weight 1.50kg
Environment Operating temperatures: ambient with air -30°C to 60°C Storage temperatures: -40°C to 80°C Relative humidity: 90% (non-condensing) Vibration (random)
- 2g@5~500 Hz (in operation, eMMC) Vibration (eMMC)
- Operating: MIL-STD-810H, Method 514.8C, Procedure 1, Category
4, common carrier US highway truck vibration exposure
- Storage: MIL-STD-810H, Method 514.8E, Procedure 1, Category 24,
minimum integrity test Shock (eMMC)
- Operating: MIL-STD-810H, Method 516.8, Procedure I, functional
shock=40g
- Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash
hazard shock test=75g
Standards/Certifications CE/FCC class B/E13
Add to Inquiry
Take a minute and tell us what you think!