nROK 7280-7AC5IP/-5AC5IP

Fanless, IP 67 AI Powered In-Vehicle/Rail Computer
Powered by Intel® Core™ Ultra Processor (Series 1)
  • Main Feature
  • Powered by Intel® Core™ Ultra processor, up to 26 TOPS AI computing power
  • Fanless, IP67 rated and rugged design
  • 5 x 2.5GbE PoE, M12 X-coded, one port supporting PoE++ (IEEE 802.3bt)
  • Expandable to 2 x WWAN and 2 x WLAN for enhanced mobile router performance
  • Support 100/1000Base-T1 Automotive Ethernet (optional)
  • 2 x 2.5” SSD, 1 x NVMe SSD (PCIe 4.0 x4) for data integrity
  • DC 9V~36V/24V rail input with ignition control & OCP/OVP
  • Wide range operating temperature of -40°C~60°C/EN 50155 (OT2)
  • MIL-STD military standard for anti-vibration/shock
  • CE/FCC, UKCA, E-mark, EN 50155 and EN 45545-2 certified
Add to Inquiry
Datasheet(PDF)
CPU Intel® Core™ Ultra processors (Series 1)
- Intel® Core™ Ultra 7 processor 155H, PBP 28W
- Intel® Core™ Ultra 5 processor 125H, PBP 28W NPU
- 2 x 2048 MACs computing performance Graphics
- Intel® Arc™ graphics
- Max resolution: 4096x2160@60Hz (HDMI®)
- DirectX: 12.2, OpenGL: 4.6
Memory 2 x DDR5 5600 SO-DIMM, 8GB default, up to 32GB per DIMM
Storage 2 x 2.5” SATA 3.0 SSD (15mm height, removable) 1 x M.2 Key M 2280 NVMe SSD (PCIe 4.0 x4)
Expansion Slots 1 x Mini PCIe slot (PCIe 4.0, USB 2.0) 1 x Mini PCIe slot (PCIe 4.0, USB 2.0), BOM option for M.2 Key B (USB3.2/2.0), supports nano-SIMs 1 x M.2 Key B 3042/3052 (USB 3.2/2.0), supports nano-SIMs for LTE/5G module 1 x M.2 Key E 2230 (PCIe 4.0 x2, USB 2.0)
Display 1 x HDMI® 2.0a, up to 3840x2160@60Hz 1 x VGA, up to 1920x1200@60Hz, wafer-type reserved
Security TPM 2.0
- Infineon SLB9672VU2.0FW15.23
2.5GbE PoE++ 5 x 2.5GbE M12 X-coded PoE connector
- Support iAMT/WoL/PXE (LAN1)
- 9Kbyte Jumbo frame
- IEEE 802.3af/at/bt, total 80W, PSE 60W for LAN1
- Support PTP (IEEE 1588)
- Controller: Intel® I226-IT
Audio 1 x Line out, unbalanced stereo, left/right channel 1 x MIC in, stereo M12 A-coded 1 x Line in, wafer reserved Codec: Realtek ALC888S-VD2-GR
DC Out 1 x DC 2V/3A, terminal block
USB 1 x USB 3.2 Gen 1
- USB host, M12 X-coded
- 5V@900mA
- Up to 5Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS linkspeed) 4 x USB 2.0 USB host, 2 x M12 A-coded 5V@500mA each
Serial Port 2 x COM port (COM1, COM2), supports RS-232 (Tx/Rx)/422/485 2 x COM port (COM3, COM4), supports RS-232 (Tx/Rx) Connector: M12 A-coded/17-pin RS-232 working voltage, ± 9V, baud rate up to 115.2kb/s 2-wire/4-wire RS-485 (baud rate: 300Kbps~115.2Kbps)
MEMS Sensor 3D accelerometer and 3D gyroscope, ST LSM6DSLTR
DI/DO (isolation) 4-bit input
- Source: 9~36V DC (12V@0.6mA/24V@1.2mA)
- External: 0~33V DC pull-high, high/low level 3.3 – 33/ 0 - 2 VDC 4-bit output
- Source: 9~36V DC (nominal 35mA@24V)
- External: 5~36V DC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C) Source or external can be selected by DIP S/W (default: source type)
CAN Bus 2 x CAN FD, compatible with CAN 2.0A/2.0B Up to 5Mb/s in data transmit, 2.5KV isolated IEC 61000-4-2 Electrostatic Discharge (ESD): ± 6KV/8KV (contact/air)
GNSS u-blox NEO-M9N GNSS module (VIOB-GPS-07) for GPS/Gloness/QZSS/Galileo/Beidou Optional DR (Dead Reckoning) function, NEO-M9V (VIOB-GPS-DR07)
Power Supply DC 9V~36V/24V rail Cranking voltage: DC 6V~9V (less than 20 sec) Reverse protection, OCP & UVP (shut down once exceeding 36.5V) Ignition on/off control & programmable on/off delay timer Connector: K-coded
I/O ports, Front-Plate 1 x Reset button 9 x LED Indicator 4 x nano-SIM (SIM1-1, SIM1-2, SIM2-1, SIM2-2), w/ a door 1 x USB 3.2 M12 X-coded 4 x USB 2.0 (2 x M12 A-coded) 1 x HDMI® 2 x 2.5” SSD bay 1 x PR-SMA for GNSS
I/O ports, Rear-Plate Multi1 port M12 A-coded (2 x CANFD, 4 x DI/4 x DO, heater LED) Multi2 port M12 A-coded (2 x RS-232/422/485 & 2 x RS-232) Multi3 port M12 A-coded (12V/3A DC-OUT, PWR/RST trigger, Line out/Mic in, optional DR) 5 x 2.5Gbe M12 X-coded PoE connector 1 x DC 9V~36V/24V Rail power input, K-coded 2 x PR-SMA for Wi-Fi ant., 4 x SMA for LTE/5G ant.
Internal Heater Activation threshold: less than -25°C Remote heater ON/OFF signal, wafer reserved
Dimensions & Weight 260.0mm x 182.0mm x 87.8mm (w/o mount bracket) 280.0mm x 182.0mm x 93.8mm (w/ mount bracket) Weight: 6.2kg
Environment Operating temperature: -40°C~60°C/EN 50155 (OT2) (w/ PoE, fanless) Storage temperature: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibration in operating MIL-STD-810H, 514.8C Procedure 6, Category 4 IEC 60068-2-64: 2.0g@5~500Hz Vibration in storage:
- MIL-STD-810H, 514.8E Procedure 1, Category 24, 7.7g Shock:
- MIL-STD-810H, 516.8 Procedure I, trucks and semi-trailers=40g
- Crash hazard: Procedure V, ground equipment=75g
Certifications CE approval, FCC Class A, UKCA, E mark , EN 50155 and EN 45545-2 certified
Operating System Windows 11 Windows 10 64bit/Windows 10 IOT Enterprise 64bit Linux (Ubuntu 22.04, Linux 5.19)
Add to Inquiry
Take a minute and tell us what you think!