VTC 1921-C2IP

Intel Atom® x7211RE Telematics IoT Gateway IP67 Water and Dust Resistant
  • Main Feature
  • IP67 precision design to resist water and dust
  • Built-in CAN FD, 1 x CAN 2.0B
  • u-blox NEO-M9N onboard
  • Four SIM cards for WWAN modules
  • Smart power management with ignition on/off delay via software control and low voltage protection
  • 2 x PoE 802.3af/at, up to total 30W
  • Certified by CE/FCC/E13 mark/EN 50155
Add to Inquiry
Datasheet(PDF)
Processor Intel Atom® x7211RE processor, TDP 6W
Memory 1 x DDR4 3200 SO-DIMM, up to 32GB, default 4GB
Storage 1 x mSATA (occupies one Mini PCIe slot) 1 x M.2 Key M 2280 for SATA 3.0 (on daughter board)
Expansion Slot 1 x Mini PCIe slot (USB 2.0, PCIe 3.0) 1 x M.2 Key B 3042/3050/3052 (USB 2.0, USB 3.2 Gen 2)
-Support an LTE/5G NR module with 2 x external nano-SIM
1 x M.2 Key E 2230 (USB 2.0, PCIe 3.0) for a Wi-Fi module
Sensor 1 x u-blox NEO-M9N onboard
-Support GPS/GLONASS/QZSS/Galileo/BeiDou
Built-in 3D accelerometer and 3D gyroscope
System Capabilities TPM 2.0
I/O Interface Front 4 x LED indicator for power, WWAN, Wi-Fi, and storage 4 x nano-SIM slot with cover 1 x 2.5GbE M12 X-code connector 1 x M12 A-code connector (MULTI1 port)
-2 x RS-232 (Tx/Rx)
-1 x RS-485 (Tx/Rx)
-4 x DI, 4 x DO
1 x COM port (DB15 male, waterproof)
-1 x USB 3.2
-1 x Mic in (L/R)
-1 x Line out (L/R)
1 x HDMI® (waterproof) 1 x Reset button 4 x Antenna hole for WWAN
I/O Interface Rear 1 x M12 connector for DC 9V~36V power input w/ ignition control 1 x M12 A-coded connector (MULTI2 port)
-1 x USB 2.0
-1 x CAN FD (w/ isolation)
-1 x CAN 2.0B (w/ isolation)
-1 x DR
5 x Antenna hole for WWAN/WLAN/GPS 2 x 2.5GbE M12 X-coded PoE connector, 802.3af/at, up to total 30W
Operating System Windows 11 Windows 10, 64bit Linux 4.x
Mechanical Dimensions: 185mm (w) x 167mm (D) x 56.5mm (H) (7.28” x 6.57” x 2.22”) Weight: 1.1kg (2.42lbs)
Environment Temperature
-Operating temperatures: -40°C~70°C for vehicle
-Operating temperatures: -40°C~70°C (OT4) for railway
-Storage temperatures: -40°C~85°C
-Damp heat test per EN 60068-2-30
Humidity
-IEC 60068-2-78, damp heat steady state test, 40°C, 95%, 48Hrs
Vibration
-IEC 60068-2-64, 2G
-Operating: MIL-STD-810H, 514.8C Procedure 1, Category 4
-Storage: MIL-STD-810H, 514.8E Procedure 1, Category 24
Shock
-MIL-STD-810H, 516.8 Procedure I, trucks and semi-trailers=40g
-Crash hazard: Procedure V, ground equipment=75g
Certifications CE FCC Class A E13 EN 50155
Add to Inquiry
Take a minute and tell us what you think!