VTC 1030

Intel Atom® x6211E Dual-Core Processor Fanless In-Vehicle Computer
  • Main Feature
  • Intel Atom® x6211E dual-core processor, 6W
  • Compact and fanless design
  • 5G NR and Wi-Fi 6/6E wireless communication options
  • Built-in GNSS receiver with optional dead reckoning function
  • Built-in 1 x CAN bus 2.0B (optional SAE J1939)
  • Wide range DC input from 9~36V
  • Smart power management with Ignition on/off delay via software control and low voltage protection
  • Dual display outputs and 2.5GbE LAN ports
  • 1 x mini-PCIe + 2 x M.2 socket expansion
  • Certified by CE/FCC/E13 mark
Add to Inquiry
CPU Intel Atom® x6211E dual-core processor, 1.3GHz/3GHz (burst), TDP 6W
Memory 1 x 260-pin DDR4 SO-DIMM socket support 3200MHz up to 32GB. Default 2666MHz, 4GB With In-Band ECC (IBECC)
Video Output 1 x HDMI 1.4b up to 3840 x 2160@30Hz 1 x VGA port 1920 x 1200@60Hz
Storage 1 x 2.5” SATA 3.0 internal drive bay (9.5mm) 1 x mSATA slot (occupied mini-PCIe slot)
Expansion 1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0/SATA 3.0) 1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2), BOM optional M.2 2230 Key E socket (USB 2.0, PCIe 3.0, PCIe 3.0) 1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 2 x external micro-SIM
GNSS and Onboard Sensor 1 x Default U-blox NEO-M9N GNSS module for GPS+QZSS/Glonass/Galileo/Beidou Optional M8U modules with dead reckoning available 1 x 3D accelerometer and 3D gyroscope
LAN 2-port LAN RJ45, 10/100/1000/2500 Mbps Ethernet, Intel® I225-IT
Security TPM 2.0: infineon SLB9670VQ2.0 FW7.62
I/O Interface-Front 6 x LED indicators (including 1 x programmable LED) 1 x USB 3.2 Gen 2 type A (5V/0.9A) 1 x USB 2.0 type A (5V/0.5A) 2 x Externally accessible micro-SIM card sockets with cover 1 x Reset button 1 x Power button 1 x DB9 (COM1) for full RS232/422/485 1 x Mic-in, 1 x Line-out 2 x LAN RJ45, 10/100/1000/2500 Mbps 2 x RP-SMA connector holes for WLAN 1 x SMA connector for GNSS
I/O Interface-Rear 1 x HDMI 1 x VGA 1 x DB9 (COM2) for full RS232/422/485 1 x DB15 (CAN/DIO)
- 1 x Isolated CANBus 2.0B
- 5 x DI and 4 x DO
1 x 3-pin terminal block for 9V~36VDC 1 x Connector (4 x 2) for 12VDC/2A output, reset, power button, RS232 (Tx/Rx) 4 x SMA connector holes for WWAN
Power Management & Software Support Power input 9~36VDC Cranking voltage: 6V~9V (< 30 seconds) Reverse protection, OCP & UVP Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software 10~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 11/Windows 10/Linux
Dimensions 185mm (W) x 120mm (D) x 45mm (H)
Weight 1.20kg
Environment Operating temperatures
- -40°C to 70°C (w/ 6W TDP CPU, industrial SSD) with air flow
Storage temperatures: -40°C to 85°C Relative humidity: 90% (non-condensing) Vibration (random)
- 2g@5~500 Hz (in operation, SSD)
Vibration (SSD)
- Operating: MIL-STD-810H, Method 514.8C, Procedure 1,
Category 4, common carrier US highway truck vibration exposure
- Storage: MIL-STD-810H, Method 514.8E, Procedure 1, Category 24, minimum integrity test
Shock (SSD)
- Operating: MIL-STD-810H, Method 516.8, Procedure I, functional
- Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash hazard shock test=75g
Certifications CE FCC Class A E13 mark
Add to Inquiry
Take a minute and tell us what you think!