VTC 6231-IP

Intel Atom® x7433RE Fanless In-Vehicle Computer with E-mark Conformity
  • Main Feature
  • Intel Atom® x7433RE processor, TDP 9W
  • Eight SIM cards + four WWAN modules support
  • Built-in u-blox-M9N GPS
  • Built-in CAN FD
  • 1 x External storage (compatible with 15mm disk)
  • E-mark conformity
  • 3 x M.2 + 2 x Mini PCIe slot expansion
  • Wide voltage DC 9V~36V power input
  • Two video outputs: one VGA and one HDMI®
  • 1 x Mic in, 1 x Line out, 1 x Line In
  • Full IP66 protection
Add to Inquiry
Datasheet(PDF)
Processor Intel Atom® x7433RE processor, TDP 9W
Memory 1 x DDR5 4800 SO-DIMM, up to 16GB, default 8GB
Display Interface 1 x VGA, up to 1920x1200@60Hz 1 x HDMI® 2.0, up to 4096x2160@60Hz
Storage 1 x 2.5” SATA 3.0 external SSD (compatible with 15mm drive) 1 x mSATA (occupies one Mini PCIe slot)
Expansion Slot 2 x M.2 Key B 3042/3050/3052 (USB 2.0, USB 3.2 Gen 2)
-Support LTE/5G NR modules with 2 x external nano-SIM 1 x Full-size Mini PCIe slot (USB 2.0, SATA, PCIe 3.0)
-Support mSATA (default), BIOS select (USB 2.0) for LTE with 2 x external nano-SIM
-BOM option (USB 2.0, PCIe 3.0) for WLAN, LAN2 will be disabled 1 x M.2 Key E 2230 (PCIe 3.0 x1, USB 2.0)
-BOM optional Mini PCIe (PCIe 3.0 x1, USB 2.0) for Hailo module 1 x Full-size Mini PCIe slot (USB 2.0, PCIe 3.0)
-Support a Wi-Fi module
-BOM optional M.2 Key B 3042/3050/3052 (USB 2.0, USB 3.2 Gen 2) for an LTE/5G NR module with 2 x external nano-SIM
Sensor 1 x Default u-blox NEO-M9N GNSS module for GPS/GLONASS/QZSS/ Galileo/Beidou Optional M9V modules with dead reckoning available G Sensor (3-axis, 10-bit resolution)
System Capabilities TPM 2.0: Infineon SLB 9670VQ2.0
I/O Interface Front 12 x LED indicator (including 3 x programmable LED) 8 x Externally accessible nano-SIM slots with cover 1 x 2.5” SATA 3.0 SSD tray (removable, 15mm) 1 x Reset button 2 x USB 3.2 Gen 2, Type-A 14 x SMA antenna
I/O Interface Rear 1 x 5-pin M12 A-coded connector
-Support DC 9V~36V power input with ignition + GND 2 x 2.5GbE M12 X-coded connector, Intel® I226-IT 1 x M12 A-coded connector with two USB 2.0 1 x M12 A-coded conncetor (AUDIO), supports 1 x Mic-in, 1 x Line-out, 1 x Line-In 1 x VGA, 1 x HDMI® 2.0 2 x M12 A-coded connector (COM1, COM2), supports selectable RS-232/422/485 full 1 x M12 A-coded connector (COM3), supports RS-232 full 1 x M12 A-coded connector (MULTI PORT)
-1 x CAN FD (isolated)
-1 x GNSS Speed/Direction
-DC 12V/2A output
-GND 1 x M12 A-coded connector (GPIO)
-4 x DI
-4 x DO
-GND
Power Management DC 9V~36V power input Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Support S3/S4 suspend mode 10~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 11 Windows 10, 64bit Linux 4.x
Mechanical Dimensions: 260.0mm (W) x 201.6mm (D) x 70.0mm (H) (10.24” x 7.94” x 2.75”) Weight: 2.8kg
Environment Temperature:
--40°C~70°C (w/ industrial SSD) with air flow
-Storage temperature: -40°C~85°C Relative humidity: 10%~90% (non-condensing) Vibration
-IEC 60068-2-64, 2G for SSD
-Operating: MIL-STD-810H, 514.8C Procedure 1, Category 4
-Storage: MIL-STD-810H, 514.8E Procedure 1, Category 24 Shock
-Operating: MIL-STD-810H, Method 516.8, Procedure I, functional shock=40g
-Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash hazard shock test=75g
Certifications CE FCC Class A E13 mark IP66 Compliance
Add to Inquiry
Take a minute and tell us what you think!