CPU | Intel Atom® processor quad core E3845, 1.91GHz |
Memory | 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB. Default 4GB |
Storage | 1 x 2.5" SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available) 1 x CFast (externally accessible) |
Expansion | 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) + video capture card 1 x Half size mini-PCIe socket (USB 2.0 + PCIe) |
GNSS Function | 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/ Beidou) or optional module with Dead Reckoning Built-in G-sensor |
Video Input Function | 4-channel analog NTSC/PAL video input 4-channel stereo audio input Recording video format: MPEG4/H.264 (Software Compression) Video resolution: Max D1 (NTSC: 720 x 480@30fps; PAL: 720 x 576@25fps) |
I/O Interface-Front | 4 x LED for power, storage, WWAN, WLAN 2 x Externally accessible SIM card socket (selectable) 1 x Phone jack 3.5mm for 1 x Mic-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x Externally accessible 2.5" SATA 2.0 SSD/HDD tray 1 x Externally accessible CFast card socket with cover 1 x Event button (trigger type) 1 x Reset button 1 x Type A USB 3.0 compliant host, supporting system boot up 4 x Antenna hole for WWAN/WLAN/BT |
I/O Interface-Rear |
1 x 9 ~ 36VDC input with ignition and 19W typical power consumption
2 x Type A USB 2.0 compliant host, supporting system boot up
2 x RJ45 10/100/1000 Fast Ethernet with LED
1 x Phone jack 3.5mm for 1 x Mic-in
1 x Phone jack 3.5mm for 1 x Line-out
1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz
1 x DP port, resolution up to 2560 x 1600 @60H
1 x Antenna hole for GPS
1 x DB-9 RS-232 (RI/12V selectable)
1 x DB-9 RS-422/485
1 x DB15 connector for 4-channel video inputs
1 x 16-pin terminal block - 1 x CAN Bus 2.0B (on board) - 1 x optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939) - 8 x GPIO (Programmable digital input and digital output) Input Voltage (internal type): 5VDC TTL (default) Input Voltage (source type): 3 ~ 12VDC (Programmable Digital output or optional isolation) Digital output (sink type): 5VDC TTL (default), max current: 20mA Digital output (source type): 3 ~ 24VDC, max current: 150mA 1 x 12VDC output (2A), SM Bus |
Power Management | Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode |
Operating System | Windows 8, WES8 Windows 7, WES8 Fedora |
Dimensions | 260mm (W) x 176mm (D) x 50mm (H) (10.24" x 6.93" x 1.97") Weight: 2.1kg |
Environment |
Operating temperatures: -30°C to 70°C (w/ industrial SSD) with air flow -20°C to 50°C (w/ commercial HDD) with air flow Storage temperatures: -35°C to 85°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 1g@5 ~ 500 Hz (in operation, HDD), 2g@5 ~ 500 Hz (in operation, SSD) Vibration (SSD/HDD): Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Shock (SSD/HDD): Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g |
Certifications | CE approval FCC Class A E13 Mark |