PDNA 110

  • Main Feature
  • NXP P2020 dual-core 1.2GHz CPU bases on power arch
  • On-board 256MB NAND flash for booting
  • On-board 1GBytes 64-bit DDR3 and 8-bit ECC
  • Two GbE port from Two SGMII
  • Eight GbE switch ports from RGMII
  • Support up to two PCIe Wi-Fi modules for 3x3 11n/11ac dual-band concurrent
Add to Inquiry
Physical Form factor: 19” 1U Dimensions: 441 x 218 x 44 (W x D x H)(mm) Mother board type: 245 x 212 mm Mounting: mounting ear kit
System Cooling Cooling method: fanless Cooler type: passive aluminum heat sink Ventilation: yes
CPU Freescale P2020 QorIQ® processor, 1.2GHz
System Memory On-board DDR3 2GB with ECC
Storage SPI: on-board SPI boot for debug NAND flash: onboard 256MB NAND flash for booting
Networking WAN: 2 Giga individual WAN ports
- BCM54616 GbE PHY x 2
LAN: 8 port GLAN switch
- Broadcom BCM53128
Front Access I/O LAN: RJ45 ports * 8 w/ status LED RJ45 LED
- Left: activity LED for blinking yellow
- Right: link LED green for 1G and yellow for 10/100
USB: USB 2.0 port x 1 Reset button: reset button x 1 (programmable through GPIO) LCM: support OLED through UART
Power Supply Power type: AT open frame power supply 300W
Environment Operating temp.: 0-40C degree Storage temp.: -20~75 degree Relative humidity: 10%~90% non-condensing Vibration: test specification for SIT SPEC Shock: non-OP shock (refer to IEC68-2-27) Acoustic noise: ISO 11201:1995 (E)/ISO 7779:1999/Amd.1:2003 (E) EMI/EMC: CE/FCC Class A ESD: 2/4KV contact discharge, 2/4/8KV air discharge, Class A Safety: CB, CCC, UL (or CSA), TUV
Add to Inquiry
Take a minute and tell us what you think!