ATC 3530

NVIDIA® Jetson Xavier™ NX Solution Accelerated AI Edge Computing
  • Main Feature
  • AI Edge in-vehicle computer
  • 4-Ch MIPI SerDes, 1080p60/4Kp30 over 15m cable (ATC 3530-IP7-4M)
  • Built-in NVIDIA® Jetson Xavier™ NX SOM, up to 21 TOPS compute
  • 4-port GbE PoE+ for IP CAM/LiDAR sensors (ATC 3530-IP7-4C)
  • HEVC/H.265 hardware CODEC, 32 x 1080p30 compute power
  • Wide range operating temperature of -30~70°C
  • The rugged, fanless design with IP67 rating
  • Ultra-speed PCIe 3.0 x4 NVMe SSD for data integry
  • NEXCOM Aided Linux (NAL) OS w/ JetPack4.5 integrated
  • Expansible for LTE/5G NR & Wi-Fi 5/6
  • 9~36V DC-in with ignition control & OCP/OVP
  • CE/FCC, UKCA, Emark certified
Add to Inquiry
Datasheet(PDF)
NVIDIA® Jetson Xavier™ NX SOM 3 x NVIDIA® 64-bit Carmel (Dual-Core) processor, 1900 MHz 384-Core Volta & 48-core Tensor integrated, 1100MHz 6 TFOPS (FP16), 21 TOPS (INT8) compute OpenGL 4.6, OpenGL ES 3.2, and Vulkan 1.1 260-Pin SO-DIMM form facor compatible with NANO/TX2 NX NVIDIA® JetPack4.5
Memory 8GB 128-bit LPDDR4, 1600MHz
Storage 16GB eMMC 5.1 flash storage, 200 MHz (HS400) 1 x Accessible microSD (SDXC, UHS-I) 1 x M.2 2280/3080 Key M PCIe 3.0 x4 NVMe SSD
Expansion 1 x Full size mPCIe socket (PCIe 3.0 + USB 2.0) 1 x M.2 3042/3052 Key B socket (USB 3.0) with 2 x micro SIM slots
Display 1 x HDMI 2.0A/B, up to 3840 x 2160@60Hz
G-Sensor 3D accelerometer and 3D gyroscope, ST LSM6DSLTR
GbE 1-Port GbE, X-coded (ATC 3530-IP7-4C) 2-Port GbE, X-coded (ATC 3530-IP7-4M) 9Kbyte Jumbo frame, PTP (IEEE 1588) support Controller: Intel® I210-IT
PoE (only for ATC 3530-IP7-4C) 4-Port Gbps, X-coded IEEE 802.3af/at compliant 30W (4-port) power budget in total PoE on/off and power watt monitoring
MIPI CSI-2 SerDes (only for ATC 3530-IP7-4M) Up to 4 x individual channel (1080p60/720p30 resolution) Thine SerDes solution (V-by-One® HS) Integrated with 3rd party MIPI SerDes camera (IP67 rating)
- 1080p60 CAM: CAM1-MT1080-IP7-15m
- 720p30 CAM: CAM1-MT720-IP7-15m
USB 2 x USB 3.0 (USB 3.2 Gen1), type A
- 5V@900mA each
- up to 5Gbit/s link speed & compliance with USB 2.0 (LS/FS/HS link speed)
1 x OTG micro USB
Serial Port 1 x RS232 (Tx, Rx, CTS, RTS) 1 x RS232 (Tx, Rx) 1 x Console port (Tx, Rx) RS232 working voltage, ±9V, baud rate up to 115.2kb/s
DI/DO (reserved) 4-Bit input
- Source: 9~36VDC (12V@0.6mA/24V@1.2mA)
- External: 0~33VDC pull-high, high-level, 3.3 - 33VDC; low-level, 0-2 VDC
4-Bit output
- Source: 9~36VDC (nominal 35mA@24V)
- External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C)
Source or external can be selected by software (default: source type)
CAN Bus 1 x CAN 2.0A/2.0B IEC 61000-4-2 Electrostatic Discharge (ESD): ±8KV/15KV (contact/air) 2.5KV isolated
GPS U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou Optional DR (dead reckoning) function, NEO-M8U/M8L
Power Supply Nominal voltage: 9~36V Cranking voltage: 6V~9V (less than 20 sec) OCP & UVP (shut down once exceeding 37V) Ignition on/off control & programmable on/off delay timer Opional for remote power on/off control
I/O Ports, Front-Plate 12 x LED indicators Reset button, 1 x microSD slot, 1 x OTG 2 x Micro SIM slots, 1 x HDMI, 2 x USB 3.0
I/O Ports, Rear-Plate 9~36VDC-in, S-coded 4 x Fakra z-code & 2 x GbE, X-coded (ATC 3530-IP7-4M) 4 x GbE PoE & 1 x GbE, X-coded (ATC 3530-IP7-4C) M12 multi-port (2 x RS232 & 1 x console, 1 x CAN)
I/O Ports, Side-Plate 2 x antenna holes for Wi-Fi 5/6 modules (PR-SMA ant.) 2 x antenna holes for LTE/5G module (SMA ant.) 1 x antenna hole for GNSS (RP-SMA ant.)
Dimensions & Weight 213mm x 167mm x 82.8mm (w/ mount bracket) 2.4kg
Environment Operating temperatures: -30°C~70°C (70°C: NVIDIA® Jetson Xavier™ NX@10W, w/o PoE; 60°C: NVIDIA® Jetson Xavier™ NX@15W w/ 30W PoE) Storage temperatures: -40°C~85°C Relative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibraion in operating
- MIL-STD-810G, 514.6C, Procedure 3, Category 4
- IEC 60068-2-64: 2.0g@5~500 Hz
- MIL-STD-810G, 514.6E, Procedure 1, Category 24, 7.7g approx.
Shock
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval, FCC Class A, UKCA, E13 certified
Operating System NEXCOM Aided Linux (NAL)
- NV Jetpack 4.5 package
- MIPI SerDes CAM Driver
- NEXCOM custom functions (GNSS, 5GNR, 6-axis sensor, MCU control)
- V4L2
- Ubuntu 18.04 @Kernel 4.9.140
External Cable Power extension cable, 20cm M12 multi-port adapter cable, 20cm
Add to Inquiry
Take a minute and tell us what you think!