Share this page

NEIO-B1201/B1202

32-CH Digital Output EtherCAT Slave Module
  • Main Feature
  • Finger-safe wiring cover
  • Detachable screw terminals
  • Rotational pin-assignment marks
  • On-module LED indicators
  • User-friendly wiring label
  • Multiple mounting methods
Add to Inquiry
Datasheet(PDF)
Digital Output NEIO-B1201
Type: NPN
Output Voltage: 24 VDC
Load Type: Resistive, Inductive
Max. Output Current: 500 mA/ch
Switching Times:
- Off to On: 100 μs
- On to Off:150 μs NEIO-B1202
Type: PNP
Output Voltage: 24 VDC
Load Type: Resistive, Inductive, Capacitive
Max. Output Current: 500 mA/ch
Switching Times:
- Off to On: 100 μs
- On to Off: 150 μs
Communication Protocol: EtherCAT Bus interface: 2 x RJ-45 (daisy-chain) Media: Ethernet cable (min. CAT 5), shielded Distance between stations: maximum. 100m (100BASE-TX) Data transfer rate: 100M baud
Power Requirements DC input range: DC 24V ±20% with over-voltage and reversed-voltage protection NEIO-B1201
- Power Consumption: 2W NEIO-B1202
- Power Consumption: 2W
Common Section Electrical isolation: 2.5 kV (power contact) Operating temperature: 0°C to 55°C Storage temperature: -40°C to 85°C Relative humidity: 5~95%, non-condensation, non-operating Shock: IEC 60068-2-27 Vibration: IEC 60068-2-6, IEC 60068-2-64 Enclosure type rating: IP20 Mounting type: din-rail (35mm), wall-mount Dimesions (mm): 155 (W) x 115 (H) x 57.4 (D)
Certifications CE FCC Class A
Add to Inquiry
Take a minute and tell us what you think!