Share this page

NEX 852VL2

LV/ULV Intel® Pentium® M/Celeron® M ATX Board with 2 x LAN/Dual Display
  • Main Feature
  • Supports Intel® Pentium® M/Celeron® M Processors with 400 MHz FSB
  • Supports LV/ULV Pentium® M/Celeron® M with 400 MHz FSB
  • Intel® 852GM/GME Chipset
  • Supports 2 x 184-pin DIMM DDR 200/266 SDRAM Memory Up to 2 GB
  • Supports Single and Dual Pixel LVDS Panel Displays, CRT and LVDS Dual Display
  • 2 x Marvell Gigabit LAN
Add to Inquiry
Datasheet(PDF)
CPU Support Socket 478uFCPGA/479uFCBGA Supports Intel® Pentium® M: 2 MB on Die L2 Cache, 400 MHz FSB, speed up to 2.0 GHz Supports Intel® Pentium® M: 1 MB on Die L2 Cache, 400 MHz FSB, speed up to 1.7 GHz Supports Intel® Celeron® M: 512 KB on Die L2 Cache, 400 MHz FSB, speed up to 1.5 GHz
Main Memory Two 184-pin DDR DIMM support up to 2 GB unbuffered non-ECC DDR SDRAM memory
Chipset Intel® 852GM Intel® ICH4
BIOS Award System BIOS ACPI Support Advanced Power Management support 4 Mbit Flash ROM
On-board LAN Marvell Gigabit Ethernet LAN 8001 x 2 (one is optional) RJ45 x 2 with LED
Display Intel® 852GM integrated dynamic video shared memory, 64 MB max, adjustable by OS Resolution: Up to 1600 x 1200 for CRT or up to 1280 x 1024 for TFT D-sub 15-pin VGA port x 1 Internal LVDS: Supports 18-bit single pixel or 18-bit dual pixel LVDS panels (Resolution support up to 1400 x 1050) Dual display: Simultaneous Scan-CRT + LVDS LCD, Dual View-CRT + LVDS LCD
I/O Interface Serial port x 2, with 2 x 16C550 UARTs. (9-pin D-sub connector x 1, 10-pin header x 1) USB 2.0: 6 ports (4 from combo connector with RJ45, 2 from 6-pin header) HDD: 40-pin connector x 2, supports ultra ATA 33/66/100 (Default: IDE channel 1) Optional CompactFlash socket: Internal CompactFlash socket x 1 (Default: IDE channel 2 master), Type-II CompactFlash cards supported Parallel: 25-pin D-sub connector, bi-directional, EPP/ECP support Floppy: 34-pin connector x 1 PS/2 Keyboard/Mouse: Mini-DIN connector x 2 AC'97 audio: Phone jack x 1 (Line-in / Line-out / Mic-in) On-board CD-in and Aux-in GPIO: 4 in, 4 out IrDA: On-board 5-pin header for IrDA Tx Rx
Watchdog Timer Programmable via GAL by Software from 1-127 sec. Or 1-127 min.
On-board RTC On-chip RTC with external Lithium battery back up
ISA Support Through PCI to ISA Interface No support for ISA DMA
System Monitor Driver support for WIN2000, XP, XPe, Linux Voltage, temperature and fan monitoring
Power Input Standard ATX 20-pin power connector
Power Requirements Measured with Intel Pentium M 2.0 GHz +12 V: 0.5 A +5 V: 5.5 A +3.3 V: 1 A +5 Vsb: 0.1 A
Dimensions Micro ATX 9.6" x 9.6"
Environment Board Level Operating Temperature: 0°C to 60°C Storage Temperature: -20°C to 80°C Relative Humidity: 10% to 90% non-condensing
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!