NEX 732L2G

Intel® Pentium® 4 ATX Board with AGP/3 x PCI-X/3 x PCI Slots
  • Main Feature
  • Intel® Pentium® 4 Processor with 400/533/800 MHz FSB, CPU Speed Up to 3.6 GHz
  • Supports 4 x DIMM Dual Channel DDR 266/333/400 SDRAM Memory up to 4GB
  • Intel® 875P/6300ESB Chipsets
  • 1 x On-board AGP Slot, 3 x PCI-X Slots, 3 x PCI Slots
  • Standard ATX Form Factor
Add to Inquiry
CPU Support Single mPGA478 ZIF socket Intel® Pentium® 4 Processor with HT Technology, with 1M L2 cache (Intel® Prescott (0.09μ process) / Intel® Pentium® 4 Processor with 256/512K L2 cach (Northwood) on die Socket 478 processor supports 400/533/800 MHz FSB, CPU speeds up to 3.6 GHz Supports Hyper-Threading technology (for all Prescott processors, or Northwood 3.06 GHz)
Main Memory Four 184-pin DDR DIMM sockets, supports up to 4 GB unbuffered ECC DDR 266/333/400 SDRAM (Note: Maximum 4 GB. Actual memorey size is dynamic based on the OS I/O resource allocation) Available bandwidth up to 3.2 GB/s (DDR 400) for single-channel mode and 6.4 GB/s (DDR 400) in dual-channel mode
Chipset Intel® 875P/6300ESB Chipsets Firmware Hub (FWH) 4 Mbit fl ash ROM x 1
BIOS Award System BIOS Plug & Play support Advanced Power Management support Advanced Confi guration & Power Interface support Jumperless for CPU FSB 4 Mbit fl ash ROM Supports Power On After Power Failure
On-board LAN Intel® 82551QM 10/100 Ethernet controller x 1 Optional Intel 82547GI Gigabit Ethernet controller x 1 (dedicated by CSA port directly from the Intel® 875P) Compliant with PCI V2.1/2.2. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab RJ45 with LED connector x 2
Display One on-board AGP 8X slot
I/O Interface Winbond W83627HF Super I/O on board SIO x 4, DB9 x 2, 10-pin header x 2, PIO x 1, Bi-directional, EPP/ECP support, DB25 x 1 Floppy Disk controller: 3.5" 1.44 MB/2.88 MB support, 34-pin connector x 1 On-chip enhanced IDE x 2, PIO up to mode 4, Ultra ATA 33/66/100 support, total of 4 EIDE device support, 40-pin connector x 2 PS/2 Keyboard/Mouse Mini-Din connector x 2 GPIO (4 in, 4 out) pin header On-board USB 2.0 ports x 4 On-board buzzer x 1 2-pin power on button switch On-board 4-pin header for SM bus (I2C) On-board 2-pin header for reset SW, 4-pin for speaker, 5-pin for keylock and 2-pin for power LED, 2-pin for IDE HDD Led Serial ATA support, SATA connector x 2; data transfer bandwidth up to 150 MB/s, RAID 0, 1 supported (for two HDD)
On-board RTC On-chip real time clock with battery back up
Disk On Module On-board reserved power pin for DOM (Disk On Module)
ISA Support Through PCI to ISA interface No ISA Master Device support No ISA DMA support Maximum of 3 ISA slots supported
System Monitor System monitor controller derived from Winbond W83627HF super I/O 7 voltage (For +3.3 V, +5 V, +12 V, Vcore, +2.5 V, +5 Vsb) 3 fan speed (For CPU x 1, system x 2) 3 temperature (For CPU x 1, system x 2)
Power Requirements +3.3 V: 11 A +5 V: 17 A +12 V: 14 A for Prescott P4 or 11 A for Northwood P4 5 Vsb: 2 A
Dimensions ATX form factor: 305 mm (L) x 244 mm (W) (12" x 9.6")
Environment Operating temperature: 0°C to 60°C Storage temperature: -20°C to 80°C Relative humidity: 10% to 90% (Non-condensing)
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!