PSNA 110

48 Ports 10G-Switch with PoE
  • Main Feature
  • 48 x GbE PoE+ ports, 4 x 10GbE SFP+ ports, 2 x QSFP ports (on the rear)
  • Support PoE at/af with 550W PoE budget
  • Redundant & hot- swappable PSU with two 600W Built-in power supply
  • Industrial design 1U rackmount kit
  • OLED on the front panel that displays the system status
Add to Inquiry
CPU ARM® Cortex™-A9 processor embedded in BCM56340
SDRAM 512MBytes DDR3 SDRAM
Flash 256MBytes NAND flash
Networking Chipset: BCM56340 + B50282 + BCM59111
Physical Construction: metal top/bottom case and aluminum panel Dimensions: 19”design, 441mm(W) x 44mm(H) x 450mm(D) Mounting: rack mount and rack rail
Display OLED panel: external uOLED (uOLED-96-G2)
I/O Interface-Front LAN: 6 x 2 x 4 RJ45 w/ status LED port SFP+: 2 x 2 SFP+ cage (10G)
I/O Interface-Rear QSFP+: 1X2 QSFP+ cage (21G) Power connector: hot swap modularize AC power connector
(default shipping two power units)
Reset button x 1
Power Power voltage: hot swap dual modularize AC power input 90~264VAC 50/60Hz
Internal I/O Console: serial port (RS232 DB9 female)
PoE PSE
- BCM59111 (IEEE802.3at per port 30W)
- Total power budget base on Power
System Cooling Cooling method: with smart Fan (0~6200rpm) Cooler type: passive aluminum heat sink
Environment Ventilation: IP30
(the access probe of 2.5mm diameter shall not penetrate)
Operating temp.: 0~45 °C Storage temp.: -20~75 °C Relative humidity: 10%~90% non-condensing Vibration: test specification for SIT spec Shock: non-OP shock (refer to IEC68-2-27) Acoustic noise: ISO 11201:1995 (E)/ISO 7779:1999/ Amd.1:2003 (E) EMI/EMC:CE/FCC Class A ESD: 2/4KV contact discharge, 2/4/8KV air discharge, Criteria B Safety: CB
Add to Inquiry
Take a minute and tell us what you think!