VMC 100

7" All-In-One Vehicle Computer with ARM® Cortex®-A8 and OBD Multiprotocol
  • Main Feature
  • 7" WVGA TFT LCD Monitor with resistor touch screen
  • ARM® Cortex®-A8 Processor with 800MHz frequency
  • Compact and fanless design
  • On screen F1 ~ F5 function key
  • Support Linux and Android system
  • Built-in GPS (Option: Dead Reckoning Support)
  • Variety wireless communication options (Support LTE)
  • Dual CAN bus support and support option OBDII (SAE J1939)
  • Wide Range DC input from 9 ~ 36V
Add to Inquiry
Datasheet(PDF)
General Cooling System: Fanless Enclosure: Plastic PC + ABS Mounting: Support VESA 75, stand mounting Four SMA Type antenna connectors of BT/Wi-Fi /WWAN/GPS Power Input: 9 ~ 36VDC input with Ignition Power Consumption: 15W Ingress Protection: Front panel IP54 Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9") Weight: TBD
LCD Panel 7-inch TFT LCD Panel with LED Backlight 800 x 480 pixels (WVGA) Brightness: 400 cd/m² (typical) Contrast ratio: 600:1 (typical)
Touch Screen Sensor 4-wire resistant touch Anti-glare coating surface Transmission rate: 78 ± 3%
CPU & Chipset ARM® Cortex®-A8 Processor with 800MHz frequency
Memory On-board DDR3 512MB
Expandable Storage 1 x Micro SDHC Slot (Bundle with 8GB)
Expansion 1 x Pin Head for WLAN option 1 x mini-PCIe socket ((USB + UART) for WWAN option) OBD option and support protocols
- SAE J1939
Battery module option
I/O Interface-Front F1 ~ F5 functions key Light Sensor Internal Mic-in 2 x Built-in 2W speakers 3 x LED indicators (Power mode, Storage and WWAN status)
I/O Interface-Lateral Right side
- 1 x Micro SD card socket
- 1 x SIM card socket
- 1 x USB 2.0 host type A connector
- 1 x Mic-in, Line-out
Left side
- 1 x Power button
- 1 x System reset button
- Volume up/down or Brightness up/dow
I/O Interface-Rear 1 x 5-pin Circular connector for Power/Ignition input 1 x RJ45 for LAN 1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A) 1 x DB9 (Male) for
- RS-485
- 2 x CAN Bus 2.0
1 x DB15 (Female) for
- GPS dead reckoning interface (optional)
- 3 x GPO, 3 x GPI
Communication Module 1 x On board GPS module 1 x WLAN or Bluetooth module for optional 1 x WWAN module for optional
Power Management Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable
Operating System Linux Ubuntu (kernel V3.2.0)
Environment Operating temperatures: Ambient with air -20°C to 60°C ŒŒStorage temperatures: -30°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 3g @5 ~ 500Hz Vibration
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
Shock
Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g
Power Design & Protection Load dump and inductive load protection Cold cranking protection Transient voltage protection Electrostatic discharge protection
Standards/Certifications EMC
- CE, FCC class B
Safety
- EN 60950-1 LVD
Add to Inquiry
Take a minute and tell us what you think!