VMC 3000/ 3001

10.4" Rugged Vehicle Mount Computer with Intel® Atom™, Touch Screen and IP65
  • Main Feature
  • 10.4" XGA TFT LCD monitor
  • Compact and fanless design
  • Built-in Intel® Atom™ D2550 processor
  • Automatic/ manual brightness control
  • On screen F1~F10 function key
  • Wake on RTC/ SMS/ LAN
  • Variety wireless communication options
  • Robust design with Die-cast aluminum
  • All enclosure compliant with IP65
  • Wide range DC input from 9~36V
  • Optional sunlight readable solution with 1000nits
Add to Inquiry
General Cooling System: Fanless Enclosure: Die-cast aluminum Mounting: Support VESA 75/100, Panel and stand mounting Three SMA Type antenna connectors of BT/ Wi-Fi/ WWAN Power Input: 9~36VDC input with Ignition Power Consumption: 26W typical Ingress Protection : IP65 (VMC3000 only Front Panel IP65) Dimension: 290mm (W) x 230mm (H) x 68mm (D)
(11.4" x 9" x 2.7")
Weight: 3Kg, 6.61Lb
LCD Panel 10.4-inch TFT LCD panel with LED backlight 1024x 768 pixels (XGA) Brightness: 400 cd/m² (typical) Optional high brightness for sunlight-readable with 1200cd/m2
After touch screen is 1000cd/m2
Contrast ratio: 600:1 (typical)
Touch Screen Sensor 5-wire resistant touch Anti-glare coating surface Transmission rate: 81 ± 3%
CPU & Chipset Intel® Atom™ D2550 1.86GHz Intel® ICH10R
Memory On-board DDR3 2GB (up to 4GB)
Expandable Storage 1 x CFast 1 x 2.5" SATA SSD bay
Expansion 1 x Mini-PCIe socket (PCIe + USB) for WLAN option 1 x Mini-PCIe socket (USB) x 1 for WWAN option 1 x OBDII module with J1939 for option
I/O Interface-Front On screen display buttons x 5
Power on/off
Volume control (+/-)
Brightness control (+/-)
Light sensor 4 x LED indicators
(Power on/off, Storage, Warning, Shift)
F1~ F10 functions key 2 x Built-in 2W speakers
I/O Interface-Lateral 1 x CFast card slot System reset button USB 2.0 host type A connector
I/O Interface-Bottom for VMC 3000 Power connector (power, ignition, ground) 1 x RS-232 1 x RS-232 with either 0, 5 or 12V on pin 9 for external devices 2 x USB 2.0 type A 1 x RJ45 10/100/1000Base-T 1 x Mic-in, 1 x Line-out 1 x 3GPI and 3GPO or CAN Bus with J1939 optional
Digital Input (source type; 0 ~ 30V)
Digital Output (sink type; 20mA max)
SMBus to support VTK 61B back up smart battery with charger 1 x SMA-type GPS antenna connector 1 x 6 pins for DC output (5V/1A & 12V/1A)
I/O Interface-Bottom for VMC 3001 (Waterproof) 1 x SMA-type GPS antenna connector 1 x 3 pin for power input (power, ignition, ground) 1 x DB9 for full RS232 1 x 10/100/1000Base-T (Waterproof type RJ45) 1 x USB (Waterproof USB type A) 1 x 6 pins for Mic in, line out 1 x 10 pins for CAN Bus with J1939 optional, GPI x 3 and GPO x 3 1 x 6 pins for DC output (5V/1A & 12V/1A)
Communication Module 1 x GPS module 1 x WLAN and Bluetooth combo module for optional 1 x WWAN module for optional
Power Management Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable Support S4 suspend mode; wake on RTC/ SMS/ LAN
Operating System WES2009 WES 7E Win7 Pro Embedded
Environment Operating temperatures ambient with air: -30°C to 60°C Storage temperatures: -30°C to 70°C Relative humidity: 10% to 90% (non-condensing) ŒŒVibration (random): 2g @5~500Hz Vibration
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks andsemi-trailers= 20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, groundequipment= 75g
Standards/ Certifications CE approval FCC Class B
Add to Inquiry
Take a minute and tell us what you think!