MVS 5603-C8SK

8-CH PoE Mobile NVR
  • Main Feature
  • Modular design for flexible I/O expansion
  • Three SIM cards + dual WWAN modules support
  • 8 x 10/100/1000 Mbps 802.3af PoE ports
  • Built-in u-blox NEO-M8N module, optional Dead Reckoning support
  • Intel® Core™ dual core i7-6600U/i3-6100U
  • Dual removable SATA 3.0 2.5" SSD/HDD
  • iButton for driver ID identification
  • Built-in CAN 2.0B. Optional OBDII function (SAE J1939)
  • Pattern number M531607 registered, an easy way to expand diverse I/O cards
Add to Inquiry
Datasheet(PDF)
CPU 6th generation Intel® Core™ dual core i7-6600U, 2.6GHz/i3-6100U,2.3GHz
Memory 2-Channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory
Storage 2 x 2.5” SATA 3.0 removable HDD/SSD trays 1 x CFast
Expansion 1 x Full size Mini-PCIe socket (USB 2.0) 1 x Full size Mini-PCIe socket (USB 2.0 + PCIe) 1 x Half size Mini-PCIe socket (USB 2.0 + PCIe)
GPS and On Board Sensor 1 x Default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou Optional modules with Dead Reckoning available Built-in G-sensor
Power over Ethernet 8-Port RJ45 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total60W
I/O Interface-Front 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health 1 x CFast socket with cover 1 x Reset button 2 x USB type A USB 3.0 port 2 x Phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out 2 x Externally accessible SIM card sockets 2 x Antenna holes for WWAN/WLAN/BT/GPS
I/O Interface-Rear 8 x RJ45 10/100/1000 Mbps PoE ports with LED 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED 1 x 9~36VDC input with ignition and 40W typical power consumption 2 x USB type A USB 3.0 port 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz 1 x HDMI port, resolution up to 2560 x 1600 @60Hz 2 x DB-9 RS-232 1 x DB-9 RS-232/422/485 (RI/5V/12V selectable) 1 x 12VDC output (2A) + SM Bus + 2 x MDI + power button 1 x DB9 connector for optional DR signal input, 2 x MDO and iButton 1 x 16-pin terminal block connector
-1 x CAN Bus 2.0B (on board)
-1 x OBDII from optional VIOB-OBD-03 module (SAE J1939)
-1 x CAN Bus 2.0B from optional VIOB-CAN-03 module
-8 x Programmable GPIO
(4 x Digital inputs, w/ optional 3KV isolation protection) Input voltage (source type): 5VDC TTL (default) Input voltage (external type): 3 ~ 12VDC
(4 x Digital outputs, w/ optional 3KV isolation protection) Digital output (source type): 5VDC TTL (default), max current: 20mA Digital output (external type): 3 ~ 24VDC, max current: 150mA
Power Management Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software.Support S3/S4 suspend mode
Operating System Windows 7/WES7/Windows 8/WES8/Windows 10/Linux kernel 3.X
Dimensions 260mm (W) x 196mm (D) x 91mm (H) (10.24” x 7.72” x 3.58”) 4kg
Environment Operating temperatures:
-30°C~60°C (w/ industrial SSD) with air flow
Storage temperatures: -40°C~80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random):
1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD)
Vibration (SSD/HDD):
-Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
-Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD/HDD):
-Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
-Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications CE approval, FCC Class A, E13 Mark
Add to Inquiry
Take a minute and tell us what you think!