VES30-4S

4 + 1 Gigabit Ethernet Switch with 4-Port PoE
  • Main Feature
  • 4 x 10/100/1000 Mbps PoE port (802.3af compliance)
  • 15.4W at 48VDC for each PoE port
  • Low battery voltage protection
  • CE/FCC, E13 mark certification
  • Wide power input range 9 ~ 36VDC
  • -30 ~ 70°C operating temperature
  • Ignition power on/off support
  • Power on/off delay time setting
Add to Inquiry
Datasheet(PDF)
Architecture Switch architecture. Highly integrated, unmanaged-smart gigabit, store and forward switch 4K entry MAC address table with automatic learning and aging
Power over Ethernet PoE standard IEEE 802.3af Power over Ethernet/PSE PoE power supply type end-span PoE power output per port 48V DC, 350mA. max. 15.4 watts
Network Connector 4-port RJ45 for 10/100/1000 base-T. PoE IEEE 802.3af compliance, total 60W 1-port RJ45 for 10/100/1000 base-T
Standard Compliance IEEE 802.3 for 10BaseT Ethernet IEEE 802.3u for 100BaseT(X) Fast Ethernet IEEE 802.3ab for 1000BaseT(X) Gigabit Ethernet IEEE 802.3x for flow control IEEE 802.3af Power Over Ethernet
I/O Interface Power: 1 x 9~36VDC input with ignition Ethernet:
4 x RJ45 10/100/1000 Mbps PoE port, 802.3af compliance
1 x RJ45 10/100/1000 Mbps
LED:
1 x power indicator
8 x PoE indicator
1 x low voltage protection indicator
Power Management Selectable boot-up & shut-down voltage for low power protection by Dip switch Power on/ off delay time setting by Dip switch
Dimensions 167 x 58.8 x 139.6 mm (65.75" x 23.14" x 54.96") Weight: 1kg Support Horizontal Mounting, DIN- Rail Mounting (option) and vertical Mounting (option)
Environment Operating temperatures: Ambient with air -30°C to 70°C Storage temperatures: -35°C to 85°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 1g@5~500 Hz Vibration:
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock:
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/Certifications CE approval FCC Class B E13 Mark
Add to Inquiry
Take a minute and tell us what you think!