VTC 6200-NI

Intel® Atom™ D510 Fanless In-Vehicle Computer
  • Main Feature
  • Built-in Intel® Atom™ D510 Dual Core 1.66GHz processor
  • Internal wireless communication (3.5G, GSM/ GPRS, WLAN, BT)
  • Smarter ignition power on/off, delay-time and low voltage protection
  • PCI-104 and mini card expansion interface
  • 8 ~ 60V wide range DC power input
  • Dual VGA output (clone mode)
  • Rugged fanless design to meet MIL standard
Add to Inquiry
CPU Intel® Atom™ D510 Dual Core 1.6GHz
Main Chipset ICH8M
Memory One 200-pin DDR2 667/800MHz SO-DIMM slot (up to 2GB)
Expansion 1 x mini-PCIe socket (PCIe + USB) for WLAN option 1 x mini-PCIe socket (USB) x 1 for WWAN option 1 x Bluetooth module for option 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning 1 x PCI-104
I/O Interface-Front 1 x Line-out, 1 x Mic-in 1 x SIM card socket 1 x System reset button 2 x USB 2.0 host type A connector 4 x LED’s for power, storage, WLAN/ HSDPA and GPIO 1 x Power button 4 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN/BT)
I/O Interface-Rear 1 x 8 ~ 60VDC input with Ignition and 23W typical power consumption 1 x 5V/1A and 12V/1A DC output, SMBus Fuse 1 x DB9 female connector for isolated 4GPI and 4GPO 2 x DB15 VGA (clone mode) 1 x DB26 LVDS interface with 12V and USB 2.0 2 x DB9 RS-232 (COM1, COM2) 1 x DB9 RS-485 (COM3) 1 x Line-out, 1 x Mic-in 2 x USB 2.0 host type A connector 1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet 1 x SMA-type GPS antenna connector
Expandable Storage 1 x 2.5" SATA II HDD bay 1 x SATA DOM
Power Management Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level on/off delay time by software Status of ignition and low voltage status can be detected by software Support S3/S4 suspend mode
Operating System Windows XP/WES2009 WES 7E
Dimensions 260mm (W) x 176mm (D) x 50mm (H) (10.24" x 6.93" x 1.97") 2.19 Kg (4.82 Lb)
Construction Aluminum enclosure with fanless design
Environment Operating temperatures:
Ambient with air -30°C to 60°C (SSD)/-30°C to 50°C (HDD)
Storage temperatures: -40°C to 80°C ŒŒRelative humidity: 10% to 90% (Non-condensing) Vibration (random):
2g@5~500 Hz with SSD; 1g@5~500 Hz with HDD (in operation)
Vibration (with SSD):
Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle
– Highway Truck
Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test
Shock (with SSD):
Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers=20g
Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment=75g
Standards/ Certifications CE approval FCC Class B e13 Mark
Add to Inquiry
Take a minute and tell us what you think!