VTC 7120-D1K

Intel® Celeron® Fanless In-Vehicle Computer with Isolation GPIO, COM and ODBII
  • Main Feature
  • Build-in Intel® Celeron® Processor 847E 1.1GHz
  • Support two Ethernet LAN ports
  • Removable 2.5" SSD tray and CFast slot
  • Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
  • Support two SIM card slots
  • PCI-104 socket
  • 9 ~ 36V wide range DC power input
  • Smarter power management and low voltage protection
  • Support isolation digital input/output and analog input
  • Rugged fanless design to meet MIL standard
  • Support Isolation RS-232 and RS-422/485
  • Wake on RTC/SMS via WWAN module
Add to Inquiry
CPU\ Intel® Core™ Celeron® Processor 847E 1.1GHz
Main Chipset QM67
Memory One 204-pin DDR3 1333MHz SO-DIMM slot (up to 8GB)
Expansion 1 x mini-PCIe socket (PCIe + USB) for WLAN option 1 x mini-PCIe socket (USB) for WWAN option 1 x Bluetooth module for option 1 x On board uBlox NEO-6Q GPS module or optional GPS with dead reckoning
I/O Interface-Front 1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication) 2 x SIM card socket (selectable) 1 x System reset button 1 x USB 2.0 host type A connector 1 x Power button 1 x CFast with protection cover 1 x Accessible 2.5" SATA II SSD tray (optional lockable storage available) 2 x DB9 isolation RS-422/485 3 x DB9 isolation RS-232 4 x LED's for power, storage, WLAN/WWAN and GPIO
I/O Interface-Rear 1 x 9 ~ 36VDC input with ignition and 29.5W typical power consumption 1 x 12V/4A DC output, SMBus 1 x DB26 LVDS interface with 12V and USB 2.0 1 x DB-15 VGA 1 x DB9 RS-232 (default) or optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939) 1 x DB9 RS-422/485 1 x DB9 female connector for 4 x DI and 4 x DO
(Digital Input)
Input voltage (Internal Type): 5VDC TTL (default)
Input voltage (Source Type): 3 ~ 12VDC
(Digital Output)
Digital output (Sink Type): 5VD CTTL (default), max current: 20mA
Digital output (Source Type): 3 ~ 24VDC, max current: 250mA
10-Pin terminal block for 8 x DI and 8 x DO
Isolation: 5K Vrms
(Isolated Digital Input)
Input voltage (Internal Type): 5VDC TTL (default)
Input voltage (Source Type): 3 ~ 12VDC
(Isolated Digital Output)
Digital output (Sink Type): 5VDCTTL (default), max current: 20mA
Digital output (Source Type): 3 ~ 24VDC, max current: 250mA
5-Pin terminal block for 3 x analog input
Isolation: 2K Vrms
2 x isolated analog voltage input 12VDC (Max.)
1 x isolated analog current input 10A (Max.)
2 x USB 2.0 host type A connector 2 x RJ45 with LEDs for 10/100/1000Mbps Ethernet 1 x Line-out, 1 x Mic-in 1 x DB9 male connector for 1 x ODBII (deafult) or 2 x OBDII (option) 1 x SMA-type GPS antenna connector 4 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN/BT)
Power Management Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level on/off delay time by software Status of ignition and low voltage status can be detected by software Support S3/S4 suspend mode
Operating System Windows XP/WES2009 WES 7E Win7 Pro for Embedded Linux 2.6
Dimensions 260mm (W) x 176mm (D) x 90.1mm (H) (10.24" x 6.93" x 3.51") 3.89 Kg (8.57 Lb)
Construction Aluminum enclosure with fanless design
Environment Operating temperatures:
-30°C to 50°C (w/ industrial SSD) with air flow
-20°C to 45°C (w/ commercial HDD) with air flow
Storage temperatures: -35°C to 85°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD) Vibration (SSD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
ŒNon-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/ Certifications CE approval FCC Class A e13 Mark
Add to Inquiry
Take a minute and tell us what you think!