VTC 1000

Intel® Atom™ E640 Fanless In-Vehicle Computer
  • Main Feature
  • Compact and fanless design
  • Built-in GPS receiver with optional dead reckoning function
  • Variety Wireless communication options
  • Built-in CAN Bus 2.0B (from EG20T)
  • Wide range DC input from 6~ 36V
  • Smart power management with Ignition on/off delay via software Control and low voltage protection
  • Certified by CE/FCC/e13 Mark
Add to Inquiry
Datasheet(PDF)
CPU Intel® Atom™ E640 1.0GHz
Main Chipset EG20T
Memory On-board DDR2 up to 2GB
Expansion 1 x mini-PCIe socket (PCIe + USB) for WLAN option 1 x mini-PCIe socket (USB) x 1 for WWAN option 1 x Bluetooth module for option 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) or optional module with Dead Reckoning
I/O Interface-Front 1 x Power button 2 x LED indicators for power and storage 1 x System reset button 2 x USB 2.0 host type A connector 1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet 1 x DB9 RS-232 1 x SIM card socket 1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication) 3 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN/BT)
I/O Interface-Rear 1 x 6 ~ 36VDC input with Ignition and 15W typical power consumption 1 x 5V/1A and 12V/1A DC output, SMBus 1 x DB9 COM port selected by SW5 & BIOS
- 1 x RS232 Full (Default)
- 1 x RS232 (Tx,Rx) + 1x RS422/485
1 x DB9 COM port selected by BIOS
- 4 x GPI
- 4 x GPO
- 2 x GPO + CAN Bus 2.0B (Default)
1 x DB15 VGA (optional DB26 LVDS interface with 12V and USB 2.0) 1 x SMA-type GPS antenna connector
Expandable Storage 1 x 2.5" SATA II SSD Bay
Operating System Windows XP/WES2009 WinXP Pro for Embedded Win7 Pro for Embedded
Power Management Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable Support S4 suspend mode
Dimensions 185mm (W) x 120mm (D) x 40mm (H) (7.3" x 4.7" x 1.6") 1 Kg (2.20 Lb)
Construction Aluminum top case with sheet metal
Environment -30°C to 70°C (w/ industrial SSD) with air flow
-20°C to 60°C (w/ commercial HDD) with air flow
Storage temperatures: -40°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 2g @5 ~ 500 Hz Vibration:
Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck
Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test
Shock:
Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers=20g
Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment=75g
Standards/ Certifications CE approval FCC Class B e13 Mark
Add to Inquiry
Take a minute and tell us what you think!