VTC 100

ARM® Cortex®-A8 Fanless In-Vehicle Computer
  • Main Feature
  • Compact and fanless design
  • ARM® Cortex®-A8 Processor with 720MHz frequency
  • Variety Wireless communication options
  • Built-in CAN Bus V2.0B; Optional support for OBDII module SAE J1939/J1708
  • Wide range DC input from 9 ~ 36V
  • Smart power management with Ignition on/off delay via software
  • Control and low voltage protection
  • Operating System Support WEC 7 and Linux 3.2 driver
Add to Inquiry
Datasheet(PDF)
MPU ARM® Cortex®-A8 Processor with 720MHz frequency
Memory On-board DDR2 256MB
Expansion 1 x CAN Bus 2.0B function, optional OBDII module (SAE J1939/J1708) 1 x mini-PCIe socket (USB) x 1 for WWAN option 1 x on-board uBlox NEO-6Q GPS module
I/O Interface-Front 2 x USB 2.0 host type A connector 1 x Line-out, 1 x Mic-in 1 x System reset button 2 x LED's for power, storage 1 x Power button 1 x SIM card socket 4 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN)
I/O Interface-Rear 1 x 9 ~ 36VDC input with Ignition and 6W typical power consumption 1 x DB9 RS-232 (COM1) 1 x DB9 RS-485 (COM2) 1 x DB9 female connector for 3GPI and 3GPO 1 x DB15 VGA 1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet 1 x SMA-type GPS antenna connector 1 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN)
Expandable Storage Micro SDHC Slot (Bundle with 4GB)
Power Management Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable
Operation System Windows Embedded Compact 7 Linux 3.2
Dimensions 180mm (W) x 110mm (D) x 45mm (H) 0.5 Kg (1.10 Lb)
Construction Aluminum top case with metal sheet
Environment Operating temperatures: Ambient with air -20°C to 70°C Storage temperatures: -40°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): 2g @5 ~ 500 Hz Vibration:
Operating: MIL-STD-810G, Method 514.6, Category 20, Ground Vehicle – Highway Truck
Storage: MIL-STD-810G, Method 514.6, Category 24, Integrity Test
Shock:
Operating: MIL-STD-810G, Method 516.6, Procedure I, Trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, Ground equipment=75g
Standards/ Certifications CE approval FCC Class B
Add to Inquiry
Take a minute and tell us what you think!