NViS 3720

Mobile NVR Surveillance Fanless System with Intel® Core™ i7-4650U
  • Main Feature
  • Intel® Core™ processor dual core i7-4650U
  • Three SIM cards + dual WWAN modules support
  • Dual externally accessible SATA 3.0 SSD/HDD
  • Built-in U-blox UBX-G6010 GPS, optional Dead Reckoning support
  • Built-in CAN 2.0B. Optional OBDII function (SAE J1939/J1708)
  • Wake on RTC/SMS via WWAN module
  • Voice communication via WWAN module
  • Compliant with MIL-STD-810G
  • 4 x mini-PCIe socket rich expansion capability
Add to Inquiry
Datasheet(PDF)
CPU Intel® Core™ processor dual core i7-4650U, 1.7GHz
Memory 2 Channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB (default built-in 4GB)
Storage 2 x 2.5" SATA 3.0 SSD/HDD (externally accessible), RAID 0/1 supported (optional lockable storage available) 1 x CFast (externally accessible)
Expansion 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) 1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Function 1 x Default U-blox UBX-G6010 GPS module (50-channel and GALIELO) or optional modules with Dead Reckoning or GLONASS support Built-in G-sensor
Software Support Windows 8, WES8 Window 7, WES7 Linux kernel 3.X
I/O Interface-Front 4 x LED for power, storage, WWAN, WLAN 2 x Externally accessible SATA 3.0 SSD/HDD tray, RAID 0/1 supported (optional lockable storage available) 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port 2 x Externally accessible SIM card socket (selectable) 1 x Phone jack 3.5mm for 1 x MIC-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x Externally accessible CFast card socket with cover 1 x Event button (trigger type) 1 x Reset button 3 x Antenna hole for WWAN/WLAN/BT
I/O Interface-Rear 1 x 9 ~ 36VDC input with ignition 1 x Dual USB type A connector for USB 3.0 port + USB 2.0 port 2 x RJ45 10/100/1000 Fast Ethernet with LED 1 x Phone jack 3.5mm for 1 x MIC-in 1 x Phone jack 3.5mm for 1 x Line-out with 1.5W output each 1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz 1 x DP port. Resolution up to 2560 x 1600 @60Hz 2 x DB-9 RS232 1 x DB-9 RS232/422/485 (RI/5V/12V selectable) 1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card), 2 x MCU-DI and 2 x MCU-DO 1 x 16-pin terminal block 1 x CAN Bus 2.0B (on board) 1 x Optional OBDII module (ASE J1939 or J1708) 8 x Programmable GPIO
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~ 12VDC
(Digital Output)
Digital Output (sink type): 5VDC TTL (default), max. current: 20mA
Digital Output (source type): 3 ~ 24VDC, max. current: 150mA
1 x 12VDC output (2A), SM Bus 4 x antenna hole for WWAN/WLAN/BT/GPS 1 x Fuse (15A)
Power Management Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode
Dimensions 260mm (W) x 206mm (D) x 79.5mm (H) (10.24" x 8.11" x 3.13") Weight: 2.5kg
Environment Operating temperature: Ambient with air -30°C ~ 60°C Storage temperature: -35°C ~ 85°C Relative humidity: 10% ~ 90% (non-condensing) Vibration (random): 1.5g@5 ~ 500Hz (in operation, HDD), 2g@5 ~ 500Hz (in operation, SSD) Vibration (SSD/HDD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimumintegrity test
Shock (SSD/HDD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crashhazard shock test=75g
Certifications CE approval FCC Class B E13 Mark
Add to Inquiry
Take a minute and tell us what you think!