NViS 2310

Mobile NVR Surveillance Fanless System with Intel® Atom™ E3845
  • Main Feature
  • Intel® Atom™ processor quad core E3845, 1.91GHz
  • Three SIM cards + dual WWAN modules support
  • Built-in U-blox UBX-G6010 GPS, optional Dead Reckoning support
  • Built-in CAN Bus 2.0B. Optional OBDII function (SAE J1939/J1708)
  • Wake on RTC/SMS via WWAN module
  • Compliant with MIL-STD-810G
  • 4 x mini-PCIe sockets expansion
  • Programmable 8 x GPIO
  • Voice communication via WWAN modul
Add to Inquiry
Datasheet(PDF)
CPU Intel® Atom™ processor quad core E3845, 1.91GHz
Memory 1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up to 8GB (default built-in 4GB)
Storage 1 x 2.5" SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available) 1 x CFast (externally accessible)
Function 1 x Default U-blox UBX-G6010 GPS module (50-channel and GALIELO) or optional modules with Dead Reckoning or GLONASS support Built-in G-sensor
Expansions 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0) 1 x Full size mini-PCIe socket (USB 2.0 + PCIe) 1 x Half size mini-PCIe socket (USB 2.0 + PCIe)
Software Support Windows 8, WES8 Window 7, WES7 Linux kernel 3.X
I/O Interface-Front 4 x LED for power, storage, WWAN, WLAN 2 x Externally accessible SIM card socket (selectable) 1 x Phone jack 3.5mm for 1 x MIC-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x Externally accessible 2.5" SATA 2.0 SSD/HDD tray 1 x Externally accessible CFast card socket with cover 1 x Event button (trigger type) 1 x Reset button 1 x Type A USB 3.0 compliant host, supporting system boot up 4 x Antenna hole for WWAN/WLAN/BT
I/O Interface-Rear 1 x 9 ~ 36VDC input with Ignition 2 x Type A USB 2.0 compliant host, supporting system boot up 2 x RJ45 10/100/1000 Fast Ethernet with LED 1 x Phone jack 3.5mm for 1 x MIC-in 1 x Phone jack 3.5mm for 1 x Line-out 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz 1 x DP port, resolution up to 2560 x 1600 @60H 1 x Antenna hole for GPS 2 x DB-9 RS232 (RI/5V/12V selectable) 1 x DB-9 RS422/485 1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B mini-PCIe card) 2 x MCU-DI and 2 x MCU-DO 1 x 16-pin terminal block 1 x CAN Bus 2.0B (on board) 1 x Optional OBDII module (ASE J1939 or J1708) 8 x GPIO (Programmable Digital Input or optional isolation)
(Digital Input)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~ 12VDC (Programmable Digital Output or optional isolation)
(Digital Output)
Digital output (sink type): 5VDC TTL (default), max. current: 20mA
Digital output (source type): 3 ~ 24VDC, max. current: 150mA
1 x 12VDC output (2A), SM Bus
Power Management Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode
Dimensions 260mm (W) x 176mm (D) x 50mm (H) (10.24" x 6.93" x 1.97") Weight: 2.1kg
Environment Operating temperature: Ambient with air -30°C ~ 70°C (SSD) Storage temperature: -35°C ~ 85°C Relative humidity: 10% ~ 90% (non-condensing) Vibration (random): 1g@5 ~ 500Hz (in operation, HDD), 2g@5 ~ 500Hz (in operation, SSD) Vibration (SSD/HDD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD/HDD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shocktest=75g
Certifications CE approval FCC Class B E13 Mark
Add to Inquiry
Take a minute and tell us what you think!