MAC 3500-GTP

Compact Motion Controller for Coordinated Application
  • Main Feature
  • Dedicated motion control DI/O for every single axis
  • 16 channels digital inputs and 16 channels digital outputs
  • Support E-CAM, E-Gear, PT and PVT control
  • Support standalone procedure access up to 32 tasks
  • 6 x USB2.0 ports
  • +9 to 30VDC power input
  • 3 x RS232 and 1 x RS-232/422/485 with Auto Flow Control
  • 2 x Intel® GbE LAN Ports
  • 1 x DB15 VGA & 1 x DVI-I
Add to Inquiry
System CPU:
- Support Intel® Core™ i7-620M PGA processor (2.66GHz, 4M Cache)
- Support Intel® Core™ i5-520M PGA processor (2.4GHz, 3M Cache)
- Support Intel® P4500 PGA processor (1.86GHz, 2M Cache)
* OnBoard mobile Intel® QM57 platform controller hub
Up to 4 GB DDR3 800/1066 SDRAM, un-buffered and non-ECC ATX power on/off switch & remote power on/off switch 2 x Intel® GbE LAN ports 6 x USB2.0 ports 3 x RS232 and 1 x RS232/422/485 with Auto Flow Control 1 x DB15 VGA & 1 x DVI-I, dual independent display supported 1 x PS/2 connector 1 x Speaker-out and 1 x Mic-in
Motion Control ±10V 16-bit control output with 4 x AB phase encoder input Dedicated HOME, LIMITs and ALARM for every single axis Dedicated SVON and Clear for every single axis Intelligent look-ahead trajectory planning Support PID plus feedforward gain control (PID+Vff+Aff) Support E-CAM, E-Gear, PT and PVT control Support standalone procedure access up to 32 tasks
General I/O Terminal board: uncommitted DI/O up to 16-channel DI and 16-channel DO
Power Requirements DC input range: +9 to 30VDC input
Dimensions System: 195mm (W) x 268mm (D) x 101mm (H)
Environment Operating temperature:
Ambient with air flow: 0°C to 55°C
(according to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
Storage temperature: -20°C to 80°C Relative humidity: 10% to 93% (non-condensing) Shock protection: 20G, half sine, 11ms, IEC60068-2-27 Vibration protection
- Random: 0.5Grms @ 5~500 Hz according to IEC68-2-64
- Sinusoidal: 0.5 Grms @ 5~500 Hz according to IEC68-2-6
Certifications CE FCC Class A
Add to Inquiry
Take a minute and tell us what you think!