NEIO-B1101/B1102

32ch Digital Input EtherCAT Slave Module
  • Main Feature
  • Finger-safe wiring cover
  • Detachable screw terminals
  • Rotational pin-assignment marks
  • On-module LED indicators
  • User-friendly wiring label
  • Multiple mounting methods
Add to Inquiry
Datasheet(PDF)
Digital Input NEIO-B1101
Type: Sink
Input Voltage: 24VDC
On-State Voltag, “1“:
- 15~30VDC (IEC 61131-2 type 1)
- 11~30VDC (IEC 61131-2 type 2/3)
Off-State Voltag, “0“: 0~5VDC(IEC 61131-2 type 1/2/3)
Inpurt Filter: 3 ms
NEIO-B1102
Type: Sink/Source
Input Voltage: 24VDC
On-State Voltag, “1“: 9~24VDC/0~15VDC
Off-State Voltag, “0“: 0~8VDC/16~24VDC
Inpurt Filter: 1 ms
Communication Protocol: EtherCAT Bus interface: 2 x RJ-45 (daisy-chain) Media: Ethernet cable (min. CAT 5), shielded Distance between stations: maximum. 100m (100BASE-TX) Data transfer rate: 100M baud
Power Requirements DC input range: DC 24V ±20% with over-voltage and reversed-voltage protection NEIO-B1101
Power Consumption: 2 W
NEIO-B1102
Power Consumption: 2.5 W
Common Section Electrical isolation: 2.5 KV (power contact) Operating temperature: 0°C to 55°C Storage temperature: -40°C to 85°C Relative humidity: 5~95%, non-condensation, non-operating Shock: IEC 60068-2-27 Vibration: IEC 60068-2-6, IEC 60068-2-64 Enclosure type rating: IP20 Mounting type: din-rail (35mm), wall-mount Dimesions (mm): 155 (W) x 115 (H) x 57.4 (D)
Certifications CE FCC Class A
Add to Inquiry
Take a minute and tell us what you think!