NET3600E-ECM

High Performance EtherCAT Controller
  • Main Feature
  • Support 3rd generation Intel® Core™ i5-3610 processor with Intel® QM77 PCH
  • EtherCAT technology with NexECM, Class A EtherCAT Master, and RTX2012
  • EtherCAT communication cycle up to 250 μs
  • Support CoE protocol
  • Support high-level API for CiA 402 profile
  • Support DC (Distributed Clocks) technology
  • Build-in full function EtherCAT application configurator, NexCAT
  • Management of real time task SDK
  • I/O access API for Windows user mode and RTX subsystem
Add to Inquiry
Datasheet(PDF)
System Intel® Core™ i5-3610ME processor pre-installed 1 x 4GB DDR3 SDRAM, pre-installed 160GB or above HDD pre-installed 1 x EtherCAT port (Intel® 82574L) 1 x Intel® GbE LAN port 2 x Display Ports and 1 x VGA or 2 x Display Ports and 1 x DVI-D 4 x USB3.0 & 2 x USB2.0 ports 1 x CFast socket 5 x RS232 & 1 x RS232/422/485 with Auto Flow Control
One PCIe x4 slot (10W max. per slot)
- 169mm max. with HDD installed
- 240mm max. without HDD installed
Pre-installed Software Package Operating System: Windows Embedded Standard 7 Windows Extension: RTX 2012 EtherCAT Master: NexECM EtherCAT Configurator: NexCAT
Power Requirements DC input range: +9 to 30VDC input
Dimensions 216mm (W) x 270mm (D) x 93mm (H)
Environment Operating temperature:
Ambient with air flow: -5°C to 55°C (according to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
Storage temperature: -20°C to 80°C Relative humidity: 10% to 93% (non-condensing) Shock protection: 20G, half sine, 11ms, IEC60068-2-27 Vibration protection
Random: 0.5Grms @ 5 ~ 500 Hz according to IEC68-2-64
Sinusoidal: 0.5 Grms @ 5~500 Hz according to IEC68-2-6
Certifications CE FCC Class A
EtherCAT Support Table Basic Features:
Service Commands: Support of all commands
IRQ field in datagram: Use IRQ information from Slave in datagram header
Slaves with Device Emulation: Support Slaves with and without application controller
EtherCAT State Machine: Support of ESM special behavior
Error Handling: Checking of network or slave errors, e.g. Working Counter
Process Data Exchange:
Cyclic PDO: Cyclic process data exchange
Network Configuration:
Reading ENI: Network Configuration taken from ENI file
Compare Network configuration: Compare configured and existing network configuration during boot-up
Explicit Device Identification: Identification used for Hot Connect and prevention against cable swapping
Station Alias Addressing: Support configured station alias in slave, i.e. enable 2nd Address and use it
Access to EEPROM: Support routines to access EEPROM via ESC register
Mailbox Support:
Support Mailbox: Main functionality for mailbox transfer
Mailbox polling: Polling Mailbox state in slaves
CAN application layer over EtherCAT (CoE):
SDO Up/Download: Normal and expedited transfer
Complete Access: Transfer the entire object (with all sub-indices) at Once
Distributed Clocks:
DC: Support of Distributed Clock
Add to Inquiry
Take a minute and tell us what you think!