IWF 5210

IP68 Outdoor 3-in-1 AP/ Repeater/ CPE 802.11a/b/g/n, Single RF, Dual Band
  • Main Feature
  • IEEE802.11 a/b/g/n for transmission rate up to 300Mbp
  • Multiple operating mode–AP/ Repeater/ CPE mode
  • IP68 rated metal housing with -25 to +70°C operating temperature
  • Gigabit Ethernet with uplink port powered with standard IEEE 802.3at PoE
  • Venting window with Teflon membrane for balancing air pressure Comprehensive security encryption with WEP, WPA/WPA2, IEEE 802.1X or PSK
  • Layer-2 Wireless Firewall gives protection from wireless attacks
  • Multiple Virtual APs for grouping policy management
  • Tunnel-based AP management by backend AP controlle
Add to Inquiry
Datasheet(PDF)
Wireless Radio Wireless interface: IEEE a/b/g/n selectable dual band radio operating in 2.4GHz or 5GHz frequencies Wireless architecture:
- AP mode
- WDS mode
- Repeater mode
- CPE mode
- Modulation
- OFDM (64-QAM, 16-QAM, QPSK, BPSK)
- DSSS (CCK, DBPSK, DQPSK)
Channels:
(1) USA: 1~11, 36, 40, 44, 48, 52~64, 100~136, 149~165
(2) Japan: 1~13, 36, 40, 44, 48, 52~64, 100~140
(3) Europe: 1~13, 36, 40, 44, 48, 52~64, 100~140
Data rate with auto fallback:
(1) 802.11a: 6 ~ 54 Mbps
(2) 802.11b: 1 ~ 11 Mbps
(3) 802.11g: 6 ~ 54 Mbps
(4) 802.11n: 6.5 ~ 300Mbps
Transmit Power: (with one stream)
(1) 802.11a: 16dBm@54Mbps ±2dB
(2) 802.11b: 25dBm@11Mbps ±2dB
(3) 802.11g: 22dBm@54Mbps ±2dB
(4) 802.11n 5G HT20 & HT40: 15dBm@MCS7 ±2dB
(5) 802.11n 2.4G HT20 & HT40: 21dBm@MCS7 ±2dB
ŒŒ ReceiverSensitivity:
(1) 802.11a: -89dBm@54Mbps ±2dB
(2) 802.11b: -93dBm@11Mbps ±2dB
(3) 802.11g: -91dBm@54Mbps ±2dB
(4) 802.11n 5G HT20: -83dBm@MCS0 ~ -65dBm@MCS7
(5) 802.11n 5G HT40: -80dBm@MCS0 ~ -62dBm@MCS7
(6) 802.11n 2.4G HT20: -85dBm@MCS0 ~ -67dBm@MCS7
(7) 802.11n 2.4G HT40: -82dBm@MCS0 ~ -62dBm@MCS7
Multiple Operating Modes AP mode WDS mode (WDS bridge): support up to 4 WDS links Repeater mode: Acting as AP and STA client simultaneously CPE mode (Clint gateway)
Gateway Features in CPE Mode IP sharing on the LAN side for multiple users (subscribers) to get access to the Internet by built-in NAT mode Built-in DHCP server for issuing local IP address Built-in DDNS/DNS client Uplink and downlink bandwidth management IP/Port forwarding and DMZ
Access Point Features Number of ESSIDs (Virtual APs): 8 Number of associated clients: 128 Setting for maximum number of associated clients Adjustable beacon interval Auto fallback data rate Support IAPP RTS/CTS and fragmentation control ACK timeout support Adjustable transmission power: 5 steps, 2dbm per step Wireless site survey: scanning the surrounding Wi-Fi signals Support IEEE 802.11e WMM and QoS
Security Data encryption: WEP (64/128/152 bits), WPA/WPA2 with TKIP or AES-CCMP with key’s refreshing period setting User authentication: WEP, IEEE 802.1z, WPA-Personal, WPA-Enterprise, MAC ACL, MAC authentication using RADIUS with built-in 802.1X Authenticator ŒŒSupports IEEE 802.11 mixed mode; open and shared key authentication Hidden ESSID: Enable/ Disable broadcasting SSID Station Isolation: All associated stations can not communicate with each other when function enabled Supports AES data encryption over WDS link Built-in Layer 2 firewall, blocking Dynamic ARP inspection & DHCP Snooping
Administration Web-based management interface with remote configuration management and firmware upgrade capabilities Utilities for system configuration backup and restoration SNMP MIB II support (v1/v2c) NTP time synchronization Watch dog: auto recovery while detecting system fault Syslog client Support Event Log and Syslog reporting to external server Supports Radius accounting and accounting update Supports statistic on total transmission encountered and transmitting error occurred
Hardware Specification Uplink Port: 1x 10/100/1000 Base-T Ethernet with IEEE802.3at PoE (as PD) 2x N-type (female) connector for external antenna Protective vent window Form factor: wall or Pole mountable Metal case: IP68 rating
Physical and Power Total power consumption: 12W maximum Support IEEE 802.3at PD Form factor: wall or pole mount Dimension (WxDxH): 182*111*45mm (not include antenna) Weight: 900g (only the IWF5210)
Environmental Specification Humidity 95 % (non-condensing) Operating Temperature: -25 ~+70°C Storage Temperature: -40 ~ +80°C
Certifications FCC, CE RoHS compliant
Package Contents IWF 5210 x 1 CD-ROM (with User's Manual and QIG) x 1 Mounting Kit x 1 Round cable x 1 PSE 30W with power cord x1
Add to Inquiry
Take a minute and tell us what you think!