NEX 885

Micro-ATX, Socket H3/ LGA1150, 4th Generation Intel® Core™ i7/i5/i3, Q87 4DDR3, 2HDMI/ DP/ VGA, 1 x PCIex16, 3 x PCIex4, 2x GbE/ 6x SATA3.0/ 4x COM/ 10x USB
  • Main Feature
  • Intel® Q87 support Socket H3/ LGA1150 for 4th Generation Intel® Core™ i7/ i5/ i3 processors
  • 4x DDR3 DIMM Socket up to 32 GB
  • Support 2x HDMI/ DisplayPort/ VGA up to three independent displays
  • 2x Intel® GbE, 6x SATA 3.0, 3x USB 3.0/ 2.0, 4x USB2.0/ 4x COM, 8x GPIO
  • 1x PCIex16, 3 x PCIex4
  • Support AT/ ATX mode by ATX Power Input
Add to Inquiry
Datasheet(PDF)
CPU Support Socket H3/ LGA1150, 4th Generation Intel® Core™ i7/ i5/ i3 processors
Main Memory 4x 240-pin dual channel long DIMMs support DDR3 1066/ 1333/ 1600MHz up to 32GB system memory
Chipset Intel® Q87 Platform Controller Hub
BIOS AMI BIOS UEFI Plug and play support
On-board LAN ETH 0: Intel® I217LM PHY for AMT 9.0 ETH 1: Intel® I211 PCI Express Gigabit Ethernet Both ETH0 and ETH1 Support boot from LAN (PXE) when +5Vsb power available 2x GbE RJ45 with LEDs
Display 4th Generation Intel® Core™ socket H3/ LGA1150 processors Integrated Gen. 7.5 HD graphics 2x HDMI 1x DisplayPort 1x VGA
Expansion 1 x PCIex16 (Gen. 3.0) 3 x PCIex4
Edge I/O Interfaces 1x Combo for PS2 KB/MS 1x stack DB9 for COM1, and 1x stack DB15 for VGA 1x HDMI, 1x stack combo of 2nd HDMI and 1x Display port 1x RJ45 (ETH 0) with dual stack USB 3.0 (blue)/ USB 2.0 connectors 1x RJ45 (ETH 1) with dual stack USB 2.0 (black) connectors 1x Stack Line-In/ Line-Out/ MIC-in phone Jack
I/O Interface USB 3.0: 3 ports ( 2x USB3.0 on edge I/O, 1x internal box-header) USB 2.0: 7 ports ( 4x USB2.0 on edge I/O, 3x internal box-header) Serial: 4 ports (default COM1/ RS-232, pre-selected 1x RS232/422/485, 2x RS-232 by internal SATA HDD: 6 ports, SATA 3.0, Support Software RAID 0/ 1/ 5/ 10 and Intel® Matrix Storage GPIO: Supports 4xGPI and 4x GPO with TTL level (0-5V), 2x6 pin header, 2.54 mm
Interface One on-board buzzer One 4-pin FAN connector for CPU, Two 3-pin FAN connector x 2 (for System) One 2x4/2.54mm pin header for: Power LED/ Storage LED/ Reset/ Power On-Off One 2x4/2.54mm pin header for :Mic-In/ Line-Out Front Panel I/O: HDD LED (1-3 pin); Power LED (2-4 pin) Reset (5-7 pin); Power Button (6-8 pin) On board pin header for IrDA Tx/Rx (option) On-chip RTC with back-up battery/ CR2032 holder onboard
System Monitor Derived from Super IO ITE IT8785E to support System Monitor Monitoring of voltages, 2 temperatures and 3 Fans Speed
4 Voltage for 3.3V, 5V, 12V, Vcore
2 Temperatures (CPU, one external Temperature Sensor)
3 Fans speed Watchdog timeout can be programmable by Software from 1 second to 255 seconds/ minutes
Power Input Support AT/ ATX mode
Standard ATX 24-pin connector for +12V/ +5V/ +3.3V/ +5Vsb/ -12V ATX 8-pin connector for +12V power connector
Dimensions Micro-ATX/ Dimension: Lx W, 244mm x 244mm; 9.6"x 9.6"
Environment Board level operating temperatures: -15°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: Operating 10% to 90%, (Non-condensing)
Certifications Meet CE FCC Class A
Add to Inquiry
Take a minute and tell us what you think!