Share this page

NISE 3100eP2

Intel® Pentium® M/Celeron® M Fanless System with 2x PCI Expansion Slot
  • Main Feature
  • Support Intel® Pentium® M/ Celeron® M Processors
  • Intel® 910GMLE chipsets
  • Dual 10/100/1000 LAN Ports
  • USB2.0/VGA/DVI Interface
  • 3x RS232 and 1x RS232/422/485 via DB44 Connector
  • On-board DC to DC Power Designed to Support +16 - 30V DC power input
  • Supports ATX Power Mode and PXE/WOL
  • Two PCI Expansion Slot
Add to Inquiry
Datasheet(PDF)
Main Board NISB3100 Support Intel® Pentium® M/ Celeron® M processors Supports Low Voltage and Ultra Low Voltage Intel® Pentium® M or Celeron® M Supports 400 MHz FSB CPUs only Intel® 910GMLE and ICH6M chipsets
Main Memory 2 x 240-pin DDR2 DIMM socket, up to 2GB un-buffered non-ECC DDR2 400 SDRAM module
Expansion Supports two 32-bit/33 MHz PCI card PCI length support:
Max. 169mm with HDD installed
Max. 240mm x2 with HDD installed
I/O Interface-Front Optional customized logo HDD Access/Power/LAN status LEDs 2 x USB2.0 ports ATX Power on/off switch
I/O Interface-Rear 1 x PS/2 Keyboard/ Mouse 4 x USB2.0 ports/ 4x Serial port 1 x Audio Mic-in and 1x Speaker-out 1 x DVI-D interface 2 x 10/100/1000 LAN 1 x DB15 VGA connector 16 ~ 30V DC power input 1 x 2-pin connector output for remote power on/off switch
Device 1 x On-board Internal Compact Flash socket 1 x Internal 2.5" SATA HDD driver bay
Power Requirements DC to DC power designed on-board, support from 16V to 30V DC input (Max: 120 Watts) 1 x Optional 120W AC/DC lockable adapter
- Power input: 100 to 240V AC 2 A 50/60 Hz
- Power output: 19V DC
Dimensions 195mm (W) x 268mm (D) x 101mm (H) (7.7" x 10.5" x 3.98")
Construction Aluminum chassis with fanless design
Environment Operating temperature: Ambient with air flow: -5°C ~ 55°C (According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14) Storage temperature: -20°C ~ 80°C Relative humidity: 10% to 93% (Non-Condensing) Shock protection: 20G, half sine, 11ms, IEC60068-2-27 Vibration protection
Random: 0.5Grms @5~500 Hz according to IEC68-2-64
Sinusoidal: 0.5Grms @5~500 Hz according to IEC68-2-6
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!